Some of the SPI device drivers at drivers/spi not a real
spi controllers, Unlike normal/generic SPI controllers they
operates only with SPI-NOR flash devices. these were technically
termed as SPI-NOR controllers, Ex: drivers/spi/fsl_qspi.c
The problem with these were resides at drivers/spi is entire
SPI layer becomes SPI-NOR flash oriented which is absolutely
a wrong indication where SPI layer getting effected more with
flash operations - So this SPI-NOR core will resolve this issue
by separating all SPI-NOR flash operations from spi layer and
creats a generic layer called SPI-NOR core which can be used to
interact SPI-NOR to SPI driver interface layer and the SPI-NOR
controller driver. The idea is taken from Linux spi-nor framework.
=======================================
cmd/spinor.c
=======================================
mtd-uclass.c
=======================================
spi-nor-uclass.c
=======================================
spi-nor.c
=======================================
m25p80.c zynq_qspinor.c
=======================================
spi-uclass.c
=======================================
zynq_qspi.c
=======================================
#####SPI NOR chip######
=======================================
Signed-off-by: Suneel Garapati <suneelgli...@gmail.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
Makefile | 1 +
drivers/mtd/spi-nor/Makefile | 7 +
drivers/mtd/spi-nor/spi-nor-ids.c | 184 +++++++++++
drivers/mtd/spi-nor/spi-nor-uclass.c | 143 +++++++++
drivers/mtd/spi-nor/spi-nor.c | 569 +++++++++++++++++++++++++++++++++++
include/dm/uclass-id.h | 1 +
include/linux/mtd/spi-nor.h | 217 +++++++++++++
7 files changed, 1122 insertions(+)
create mode 100644 drivers/mtd/spi-nor/Makefile
create mode 100644 drivers/mtd/spi-nor/spi-nor-ids.c
create mode 100644 drivers/mtd/spi-nor/spi-nor-uclass.c
create mode 100644 drivers/mtd/spi-nor/spi-nor.c
create mode 100644 include/linux/mtd/spi-nor.h
diff --git a/Makefile b/Makefile
index e6d309a..70b5202 100644
--- a/Makefile
+++ b/Makefile
@@ -662,6 +662,7 @@ libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
libs-y += drivers/mtd/onenand/
libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
libs-y += drivers/mtd/spi/
+libs-y += drivers/mtd/spi-nor/
libs-y += drivers/net/
libs-y += drivers/net/phy/
libs-y += drivers/pci/
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
new file mode 100644
index 0000000..c1212a8
--- /dev/null
+++ b/drivers/mtd/spi-nor/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2016 Jagan Teki <ja...@openedev.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+
+## spi-nor core
+obj-y += spi-nor.o spi-nor-uclass.o spi-nor-ids.o
diff --git a/drivers/mtd/spi-nor/spi-nor-ids.c
b/drivers/mtd/spi-nor/spi-nor-ids.c
new file mode 100644
index 0000000..db95655
--- /dev/null
+++ b/drivers/mtd/spi-nor/spi-nor-ids.c
@@ -0,0 +1,184 @@
+/*
+ * SPI NOR IDs.
+ *
+ * Copyright (C) 2016 Jagan Teki <ja...@openedev.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+/* Used when the "_ext_id" is two bytes at most */
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),
\
+ .sector_size = (_sector_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = 256, \
+ .flags = (_flags),
+
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 16) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = 6, \
+ .sector_size = (_sector_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = 256, \
+ .flags = (_flags),
+
+const struct spi_nor_info spi_nor_ids[] = {
+#ifdef CONFIG_SPI_NOR_MACRONIX /* MACRONIX */
+ {"mx25l2006e", INFO(0xc22012, 0x0, 64 * 1024, 4, 0) },
+ {"mx25l4005", INFO(0xc22013, 0x0, 64 * 1024, 8, 0) },
+ {"mx25l8005", INFO(0xc22014, 0x0, 64 * 1024, 16, 0) },
+ {"mx25l1605d", INFO(0xc22015, 0x0, 64 * 1024, 32, 0) },
+ {"mx25l3205d", INFO(0xc22016, 0x0, 64 * 1024, 64, 0) },
+ {"mx25l6405d", INFO(0xc22017, 0x0, 64 * 1024, 128, 0) },
+ {"mx25l12805", INFO(0xc22018, 0x0, 64 * 1024, 256, RD_FULL |
WR_QPP) },
+ {"mx25l25635f", INFO(0xc22019, 0x0, 64 * 1024, 512, RD_FULL |
WR_QPP) },
+ {"mx25l51235f", INFO(0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL |
WR_QPP) },
+ {"mx25u6435f", INFO(0xc22537, 0x0, 64 * 1024, 128, RD_FULL |
WR_QPP) },
+ {"mx25l12855e", INFO(0xc22618, 0x0, 64 * 1024, 256, RD_FULL |
WR_QPP) },
+ {"mx25u1635e", INFO(0xc22535, 0x0, 64 * 1024, 32, SECT_4K) },
+ {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL |
WR_QPP) },
+ {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL |
WR_QPP) },
+#endif
+#ifdef CONFIG_SPI_NOR_SPANSION /* SPANSION */
+ {"s25fl008a", INFO(0x010213, 0x0, 64 * 1024, 16, 0) },
+ {"s25fl016a", INFO(0x010214, 0x0, 64 * 1024, 32, 0) },
+ {"s25fl032a", INFO(0x010215, 0x0, 64 * 1024, 64, 0) },
+ {"s25fl064a", INFO(0x010216, 0x0, 64 * 1024, 128, 0) },
+ {"s25fl116k", INFO(0x014015, 0x0, 64 * 1024, 32, 0) },
+ {"s25fl164k", INFO(0x014017, 0x0140, 64 * 1024, 128, 0) },
+ {"s25fl128p_256k", INFO(0x012018, 0x0300, 256 * 1024, 64, RD_FULL |
WR_QPP) },
+ {"s25fl128p_64k", INFO(0x012018, 0x0301, 64 * 1024, 256, RD_FULL |
WR_QPP) },
+ {"s25fl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, RD_FULL |
WR_QPP) },
+ {"s25fl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, RD_FULL |
WR_QPP) },
+ {"s25fl128s_256k", INFO(0x012018, 0x4d00, 256 * 1024, 64, RD_FULL |
WR_QPP) },
+ {"s25fl128s_64k", INFO(0x012018, 0x4d01, 64 * 1024, 256, RD_FULL |
WR_QPP) },
+ {"s25fl256s_256k", INFO(0x010219, 0x4d00, 256 * 1024, 128, RD_FULL |
WR_QPP) },
+ {"s25fs256s_64k", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, RD_FULL |
WR_QPP | SECT_4K) },
+ {"s25fl256s_64k", INFO(0x010219, 0x4d01, 64 * 1024, 512, RD_FULL |
WR_QPP) },
+ {"s25fs512s", INFO6(0x010220, 0x4d0081, 128 * 1024, 512, RD_FULL |
WR_QPP | SECT_4K) },
+ {"s25fl512s_256k", INFO(0x010220, 0x4d00, 256 * 1024, 256, RD_FULL |
WR_QPP) },
+ {"s25fl512s_64k", INFO(0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL |
WR_QPP) },
+ {"s25fl512s_512k", INFO(0x010220, 0x4f00, 256 * 1024, 256, RD_FULL |
WR_QPP) },
+#endif
+#ifdef CONFIG_SPI_NOR_STMICRO /* STMICRO */
+ {"m25p10", INFO(0x202011, 0x0, 32 * 1024, 4, 0) },
+ {"m25p20", INFO(0x202012, 0x0, 64 * 1024, 4, 0) },
+ {"m25p40", INFO(0x202013, 0x0, 64 * 1024, 8, 0) },
+ {"m25p80", INFO(0x202014, 0x0, 64 * 1024, 16, 0) },
+ {"m25p16", INFO(0x202015, 0x0, 64 * 1024, 32, 0) },
+ {"m25pE16", INFO(0x208015, 0x1000, 64 * 1024, 32, 0) },
+ {"m25pX16", INFO(0x207115, 0x1000, 64 * 1024, 32, RD_QUAD |
RD_DUAL) },
+ {"m25p32", INFO(0x202016, 0x0, 64 * 1024, 64, 0) },
+ {"m25p64", INFO(0x202017, 0x0, 64 * 1024, 128, 0) },
+ {"m25p128", INFO(0x202018, 0x0, 256 * 1024, 64, 0) },
+ {"m25pX64", INFO(0x207117, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"n25q016a", INFO(0x20bb15, 0x0, 64 * 1024, 32, SECT_4K) },
+ {"n25q32", INFO(0x20ba16, 0x0, 64 * 1024, 64, RD_FULL |
WR_QPP | SECT_4K) },
+ {"n25q32a", INFO(0x20bb16, 0x0, 64 * 1024, 64, RD_FULL |
WR_QPP | SECT_4K) },
+ {"n25q64", INFO(0x20ba17, 0x0, 64 * 1024, 128, RD_FULL |
WR_QPP | SECT_4K) },
+ {"n25q64a", INFO(0x20bb17, 0x0, 64 * 1024, 128, RD_FULL |
WR_QPP | SECT_4K) },
+ {"n25q128", INFO(0x20ba18, 0x0, 64 * 1024, 256, RD_FULL |
WR_QPP) },
+ {"n25q128a", INFO(0x20bb18, 0x0, 64 * 1024, 256, RD_FULL |
WR_QPP) },
+ {"n25q256", INFO(0x20ba19, 0x0, 64 * 1024, 512, RD_FULL |
WR_QPP | SECT_4K) },
+ {"n25q256a", INFO(0x20bb19, 0x0, 64 * 1024, 512, RD_FULL |
WR_QPP | SECT_4K) },
+ {"n25q512", INFO(0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL |
WR_QPP | E_FSR | SECT_4K) },
+ {"n25q512a", INFO(0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL |
WR_QPP | E_FSR | SECT_4K) },
+ {"n25q1024", INFO(0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL |
WR_QPP | E_FSR | SECT_4K) },
+ {"n25q1024a", INFO(0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL |
WR_QPP | E_FSR | SECT_4K) },
+ {"mt25qu02g", INFO(0x20bb22, 0x0, 64 * 1024, 4096, RD_FULL |
WR_QPP | E_FSR | SECT_4K) },
+ {"mt25ql02g", INFO(0x20ba22, 0x0, 64 * 1024, 4096, RD_FULL |
WR_QPP | E_FSR | SECT_4K) },
+ {"mt35xu512g", INFO6(0x2c5b1a, 0x104100, 128 * 1024, 512, E_FSR |
SECT_4K) },
+#endif
+#ifdef CONFIG_SPI_NOR_SST /* SST */
+ {"sst25vf040b", INFO(0xbf258d, 0x0, 64 * 1024, 8, SECT_4K |
SST_WR) },
+ {"sst25vf080b", INFO(0xbf258e, 0x0, 64 * 1024, 16, SECT_4K |
SST_WR) },
+ {"sst25vf016b", INFO(0xbf2541, 0x0, 64 * 1024, 32, SECT_4K |
SST_WR) },
+ {"sst25vf032b", INFO(0xbf254a, 0x0, 64 * 1024, 64, SECT_4K |
SST_WR) },
+ {"sst25vf064c", INFO(0xbf254b, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"sst25wf512", INFO(0xbf2501, 0x0, 64 * 1024, 1, SECT_4K |
SST_WR) },
+ {"sst25wf010", INFO(0xbf2502, 0x0, 64 * 1024, 2, SECT_4K |
SST_WR) },
+ {"sst25wf020", INFO(0xbf2503, 0x0, 64 * 1024, 4, SECT_4K |
SST_WR) },
+ {"sst25wf040", INFO(0xbf2504, 0x0, 64 * 1024, 8, SECT_4K |
SST_WR) },
+ {"sst25wf040b", INFO(0x621613, 0x0, 64 * 1024, 8, SECT_4K) },
+ {"sst25wf080", INFO(0xbf2505, 0x0, 64 * 1024, 16, SECT_4K |
SST_WR) },
+#endif
+#ifdef CONFIG_SPI_NOR_WINBOND /* WINBOND */
+ {"w25p80", INFO(0xef2014, 0x0, 64 * 1024, 16, 0) },
+ {"w25p16", INFO(0xef2015, 0x0, 64 * 1024, 32, 0) },
+ {"w25p32", INFO(0xef2016, 0x0, 64 * 1024, 64, 0) },
+ {"w25x40", INFO(0xef3013, 0x0, 64 * 1024, 8, SECT_4K) },
+ {"w25x16", INFO(0xef3015, 0x0, 64 * 1024, 32, SECT_4K) },
+ {"w25x32", INFO(0xef3016, 0x0, 64 * 1024, 64, SECT_4K) },
+ {"w25x64", INFO(0xef3017, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"w25q80bl", INFO(0xef4014, 0x0, 64 * 1024, 16, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q16cl", INFO(0xef4015, 0x0, 64 * 1024, 32, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q32bv", INFO(0xef4016, 0x0, 64 * 1024, 64, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q64cv", INFO(0xef4017, 0x0, 64 * 1024, 128, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q128bv", INFO(0xef4018, 0x0, 64 * 1024, 256, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q256", INFO(0xef4019, 0x0, 64 * 1024, 512, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q80bw", INFO(0xef5014, 0x0, 64 * 1024, 16, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q16dw", INFO(0xef6015, 0x0, 64 * 1024, 32, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q32dw", INFO(0xef6016, 0x0, 64 * 1024, 64, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q64dw", INFO(0xef6017, 0x0, 64 * 1024, 128, RD_FULL |
WR_QPP | SECT_4K) },
+ {"w25q128fw", INFO(0xef6018, 0x0, 64 * 1024, 256, RD_FULL |
WR_QPP | SECT_4K) },
+#endif
+#ifdef CONFIG_SPI_NOR_MISC
+ /* ATMEL */
+ {"at45db011d", INFO(0x1f2200, 0x0, 64 * 1024, 4, SECT_4K) },
+ {"at45db021d", INFO(0x1f2300, 0x0, 64 * 1024, 8, SECT_4K) },
+ {"at45db041d", INFO(0x1f2400, 0x0, 64 * 1024, 8, SECT_4K) },
+ {"at45db081d", INFO(0x1f2500, 0x0, 64 * 1024, 16, SECT_4K) },
+ {"at45db161d", INFO(0x1f2600, 0x0, 64 * 1024, 32, SECT_4K) },
+ {"at45db321d", INFO(0x1f2700, 0x0, 64 * 1024, 64, SECT_4K) },
+ {"at45db641d", INFO(0x1f2800, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"at25df321a", INFO(0x1f4701, 0x0, 64 * 1024, 64, SECT_4K) },
+ {"at25df321", INFO(0x1f4700, 0x0, 64 * 1024, 64, SECT_4K) },
+ {"at26df081a", INFO(0x1f4501, 0x0, 64 * 1024, 16, SECT_4K) },
+
+ /* EON */
+ {"en25q32b", INFO(0x1c3016, 0x0, 64 * 1024, 64, 0) },
+ {"en25q64", INFO(0x1c3017, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"en25q128b", INFO(0x1c3018, 0x0, 64 * 1024, 256, 0) },
+ {"en25s64", INFO(0x1c3817, 0x0, 64 * 1024, 128, 0) },
+
+ /* GIGADEVICE */
+ {"gd25q64b", INFO(0xc84017, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"gd25lq32", INFO(0xc86016, 0x0, 64 * 1024, 64, SECT_4K) },
+
+ /* ISSI */
+ {"is25lq040b", INFO(0x9d4013, 0x0, 64 * 1024, 8, 0) },
+ {"is25lp032", INFO(0x9d6016, 0x0, 64 * 1024, 64, 0) },
+ {"is25lp064", INFO(0x9d6017, 0x0, 64 * 1024, 128, 0) },
+ {"is25lp128", INFO(0x9d6018, 0x0, 64 * 1024, 256, 0) },
+#endif
+ {}, /* Empty entry to terminate the list */
+ /*
+ * Note:
+ * Below paired flash devices has similar spi_nor params.
+ * (s25fl129p_64k, s25fl128s_64k)
+ * (w25q80bl, w25q80bv)
+ * (w25q16cl, w25q16dv)
+ * (w25q32bv, w25q32fv_spi)
+ * (w25q64cv, w25q64fv_spi)
+ * (w25q128bv, w25q128fv_spi)
+ * (w25q32dw, w25q32fv_qpi)
+ * (w25q64dw, w25q64fv_qpi)
+ * (w25q128fw, w25q128fv_qpi)
+ */
+};
diff --git a/drivers/mtd/spi-nor/spi-nor-uclass.c
b/drivers/mtd/spi-nor/spi-nor-uclass.c
new file mode 100644
index 0000000..919682d
--- /dev/null
+++ b/drivers/mtd/spi-nor/spi-nor-uclass.c
@@ -0,0 +1,143 @@
+/*
+ * SPI NOR Core framework.
+ *
+ * Copyright (C) 2016 Jagan Teki <ja...@openedev.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <mtd.h>
+
+#include <dm/device-internal.h>
+#include <linux/mtd/spi-nor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct spi_nor *spi_nor_get_spi_nor_dev(struct udevice *dev)
+{
+ struct spi_nor_uclass_priv *upriv;
+
+ if (!device_active(dev))
+ return NULL;
+ upriv = dev_get_uclass_priv(dev);
+ return upriv->spi_nor;
+}
+
+struct spi_nor *find_spi_nor_device(int dev_num)
+{
+ struct udevice *dev, *spi_nor_dev;
+ int ret;
+
+ ret = mtd_find_device(MTD_IF_TYPE_SPI_NOR, dev_num, &dev);
+ if (ret) {
+ printf("SPI-NOR Device %d not found\n", dev_num);
+ return NULL;
+ }
+
+ spi_nor_dev = dev_get_parent(dev);
+
+ struct spi_nor *nor = spi_nor_get_spi_nor_dev(spi_nor_dev);
+
+ return nor;
+}
+
+int get_spi_nor_num(void)
+{
+ return max((mtd_find_max_devnum(MTD_IF_TYPE_SPI_NOR) + 1), 0);
+}
+
+struct mtd_info *spi_nor_get_mtd_info(struct spi_nor *nor)
+{
+ struct mtd_info *mtd;
+ struct udevice *dev;
+
+ device_find_first_child(nor->dev, &dev);
+ if (!dev)
+ return NULL;
+ mtd = dev_get_uclass_platdata(dev);
+
+ return mtd;
+}
+
+void print_spi_nor_devices(char separator)
+{
+ struct udevice *dev;
+ bool first = true;
+
+ for (uclass_first_device(UCLASS_SPI_NOR, &dev);
+ dev;
+ uclass_next_device(&dev), first = false) {
+ struct spi_nor *nor = spi_nor_get_spi_nor_dev(dev);
+
+ if (!first) {
+ printf("%c", separator);
+ if (separator != '\n')
+ puts(" ");
+ }
+
+ printf("%s: %d", dev->name, spi_nor_get_mtd_info(nor)->devnum);
+ }
+
+ printf("\n");
+}
+
+int spi_nor_bind(struct udevice *dev, struct spi_nor *nor)
+{
+ struct udevice *mdev;
+ int ret;
+
+ if (!spi_nor_get_ops(dev))
+ return -ENOSYS;
+
+ ret = mtd_create_devicef(dev, "spinor_mtd", "mtd", MTD_IF_TYPE_SPI_NOR,
+ &mdev);
+ if (ret) {
+ debug("Cannot create mtd device\n");
+ return ret;
+ }
+ nor->dev = dev;
+
+ return 0;
+}
+
+static int spi_nor_mtd_probe(struct udevice *dev)
+{
+ struct udevice *spi_nor_dev = dev_get_parent(dev);
+ struct spi_nor_uclass_priv *upriv = dev_get_uclass_priv(spi_nor_dev);
+ struct spi_nor *nor = upriv->spi_nor;
+ int ret;
+
+ ret = spi_nor_scan(nor);
+ if (ret) {
+ debug("%s: spi_nor_scan() failed (err=%d)\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ops spi_nor_mtd_ops = {
+ .read = spi_nor_mread,
+ .erase = spi_nor_merase,
+};
+
+U_BOOT_DRIVER(spinor_mtd) = {
+ .name = "spinor_mtd",
+ .id = UCLASS_MTD,
+ .ops = &spi_nor_mtd_ops,
+ .probe = spi_nor_mtd_probe,
+};
+
+U_BOOT_DRIVER(spinor) = {
+ .name = "spinor",
+ .id = UCLASS_SPI_NOR,
+};
+
+UCLASS_DRIVER(spinor) = {
+ .id = UCLASS_SPI_NOR,
+ .name = "spinor",
+ .flags = DM_UC_FLAG_SEQ_ALIAS,
+ .per_device_auto_alloc_size = sizeof(struct spi_nor_uclass_priv),
+};
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
new file mode 100644
index 0000000..09fb8ca
--- /dev/null
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -0,0 +1,569 @@
+/*
+ * SPI NOR Core framework.
+ *
+ * Copyright (C) 2016 Jagan Teki <ja...@openedev.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <mapmem.h>
+#include <mtd.h>
+
+#include <dm/device-internal.h>
+#include <linux/math64.h>
+#include <linux/types.h>
+#include <linux/mtd/spi-nor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Set write enable latch with Write Enable command */
+static inline int write_enable(struct udevice *dev)
+{
+ return spi_nor_get_ops(dev)->write_reg(dev, SNOR_OP_WREN, NULL, 0);
+}
+
+/* Re-set write enable latch with Write Disable command */
+static inline int write_disable(struct udevice *dev)
+{
+ return spi_nor_get_ops(dev)->write_reg(dev, SNOR_OP_WRDI, NULL, 0);
+}
+
+static int read_sr(struct udevice *dev)
+{
+ u8 sr;
+ int ret;
+
+ ret = spi_nor_get_ops(dev)->read_reg(dev, SNOR_OP_RDSR, &sr, 1);
+ if (ret < 0) {
+ debug("spi-nor: fail to read status register\n");
+ return ret;
+ }
+
+ return sr;
+}
+
+static int read_fsr(struct udevice *dev)
+{
+ u8 fsr;
+ int ret;
+
+ ret = spi_nor_get_ops(dev)->read_reg(dev, SNOR_OP_RDFSR, &fsr, 1);
+ if (ret < 0) {
+ debug("spi-nor: fail to read flag status register\n");
+ return ret;
+ }
+
+ return fsr;
+}
+
+static int write_sr(struct udevice *dev, u8 ws)
+{
+ struct spi_nor *nor = spi_nor_get_spi_nor_dev(dev);
+ const struct spi_nor_ops *ops = spi_nor_get_ops(dev);
+
+ nor->cmd_buf[0] = ws;
+ return ops->write_reg(dev, SNOR_OP_WRSR, nor->cmd_buf, 1);
+}
+
+#if defined(CONFIG_SPI_NOR_SPANSION) || defined(CONFIG_SPI_NOR_WINBOND)
+static int read_cr(struct udevice *dev)
+{
+ u8 cr;
+ int ret;
+
+ ret = spi_nor_get_ops(dev)->read_reg(dev, SNOR_OP_RDCR, &cr, 1);
+ if (ret < 0) {
+ debug("spi-nor: fail to read config register\n");
+ return ret;
+ }
+
+ return cr;
+}
+
+/*
+ * Write status Register and configuration register with 2 bytes
+ * - First byte will be written to the status register.
+ * - Second byte will be written to the configuration register.
+ * Return negative if error occured.
+ */
+static int write_sr_cr(struct udevice *dev, u16 val)
+{
+ struct spi_nor *nor = spi_nor_get_spi_nor_dev(dev);
+ const struct spi_nor_ops *ops = spi_nor_get_ops(dev);
+
+ nor->cmd_buf[0] = val & 0xff;
+ nor->cmd_buf[1] = (val >> 8);
+
+ return ops->write_reg(dev, SNOR_OP_WRSR, nor->cmd_buf, 2);
+}
+#endif
+
+static int spi_nor_sr_ready(struct udevice *dev)
+{
+ int sr = read_sr(dev);
+ if (sr < 0)
+ return sr;
+ else
+ return !(sr & SR_WIP);
+}
+
+static int spi_nor_fsr_ready(struct udevice *dev)
+{
+ int fsr = read_fsr(dev);
+ if (fsr < 0)
+ return fsr;
+ else
+ return fsr & FSR_READY;
+}
+
+static int spi_nor_ready(struct udevice *dev)
+{
+ struct spi_nor *nor = spi_nor_get_spi_nor_dev(dev);
+ int sr, fsr;
+
+ sr = spi_nor_sr_ready(dev);
+ if (sr < 0)
+ return sr;
+
+ fsr = 1;
+ if (nor->flags & SNOR_F_USE_FSR) {
+ fsr = spi_nor_fsr_ready(dev);
+ if (fsr < 0)
+ return fsr;
+ }
+
+ return sr && fsr;
+}
+
+static int spi_nor_wait_till_ready(struct udevice *dev, unsigned long timeout)
+{
+ int timebase, ret;
+
+ timebase = get_timer(0);
+
+ while (get_timer(timebase) < timeout) {
+ ret = spi_nor_ready(dev);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ return 0;
+ }
+
+ printf("spi-nor: Timeout!\n");
+
+ return -ETIMEDOUT;
+}
+
+static const struct spi_nor_info *spi_nor_id(struct udevice *dev)
+{
+ int tmp;
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ const struct spi_nor_info *info;
+ const struct spi_nor_ops *ops = spi_nor_get_ops(dev);
+
+ tmp = ops->read_reg(dev, SNOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
+ if (tmp < 0) {
+ printf("spi-nor: error %d reading JEDEC ID\n", tmp);
+ return ERR_PTR(tmp);
+ }
+
+ info = spi_nor_ids;
+ for (; info->name != NULL; info++) {
+ if (info->id_len) {
+ if (!memcmp(info->id, id, info->id_len))
+ return info;
+ }
+ }
+
+ printf("spi-nor: unrecognized JEDEC id bytes: %02x, %2x, %2x\n",
+ id[0], id[1], id[2]);
+ return ERR_PTR(-ENODEV);
+}
+
+int spi_nor_merase(struct udevice *dev, struct erase_info *instr)
+{
+ struct mtd_info *mtd = dev_get_uclass_platdata(dev);
+ int devnum = mtd->devnum;
+ struct spi_nor *nor;
+ const struct spi_nor_ops *ops;
+ u32 addr, len, erase_addr;
+ uint32_t rem;
+ int ret = -1;
+
+ nor = find_spi_nor_device(devnum);
+ if (!nor)
+ return -ENODEV;
+ ops = spi_nor_get_ops(nor->dev);
+
+ div_u64_rem(instr->len, mtd->erasesize, &rem);
+ if (rem)
+ return -EINVAL;
+
+ addr = instr->addr;
+ len = instr->len;
+
+ while (len) {
+ erase_addr = addr;
+
+ write_enable(nor->dev);
+
+ ret = ops->write(nor->dev, erase_addr, 0, NULL);
+ if (ret < 0)
+ goto erase_err;
+
+ ret = spi_nor_wait_till_ready(nor->dev, SNOR_READY_WAIT_ERASE);
+ if (ret < 0)
+ goto erase_err;
+
+ addr += mtd->erasesize;
+ len -= mtd->erasesize;
+ }
+
+ write_disable(nor->dev);
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+
+ return ret;
+
+erase_err:
+ instr->state = MTD_ERASE_FAILED;
+ return ret;
+}
+
+static int spi_nor_mwrite(struct udevice *dev, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct mtd_info *mtd = dev_get_uclass_platdata(dev);
+ int devnum = mtd->devnum;
+ struct spi_nor *nor;
+ const struct spi_nor_ops *ops;
+ size_t addr, byte_addr;
+ size_t chunk_len, actual;
+ uint32_t page_size;
+ int ret = -1;
+
+ nor = find_spi_nor_device(devnum);
+ if (!nor)
+ return -ENODEV;
+ ops = spi_nor_get_ops(nor->dev);
+
+ page_size = mtd->writebufsize;
+
+ for (actual = 0; actual < len; actual += chunk_len) {
+ addr = to;
+
+ byte_addr = addr % page_size;
+ chunk_len = min(len - actual, (size_t)(page_size - byte_addr));
+
+ if (nor->max_write_size)
+ chunk_len = min(chunk_len,
+ (size_t)nor->max_write_size);
+
+ write_enable(nor->dev);
+
+ ret = ops->write(nor->dev, addr, chunk_len, buf + actual);
+ if (ret < 0)
+ break;
+
+ ret = spi_nor_wait_till_ready(nor->dev, SNOR_READY_WAIT_PROG);
+ if (ret < 0)
+ return ret;
+
+ to += chunk_len;
+ *retlen += chunk_len;
+ }
+
+ return ret;
+}
+
+int spi_nor_mread(struct udevice *dev, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct mtd_info *mtd = dev_get_uclass_platdata(dev);
+ int devnum = mtd->devnum;
+ struct spi_nor *nor;
+ const struct spi_nor_ops *ops;
+ int ret;
+
+ nor = find_spi_nor_device(devnum);
+ if (!nor)
+ return -ENODEV;
+ ops = spi_nor_get_ops(nor->dev);
+
+ /* Handle memory-mapped SPI */
+ if (nor->memory_map) {
+ ret = ops->read(nor->dev, from, len, buf);
+ if (ret) {
+ debug("spi-nor: mmap read failed\n");
+ return ret;
+ }
+
+ return ret;
+ }
+
+ ret = ops->read(nor->dev, from, len, buf);
+ if (ret < 0) {
+ printf("%s ret = %d\n", __func__, ret);
+ return ret;
+ }
+
+ *retlen += len;
+
+ return ret;
+}
+
+#ifdef CONFIG_SPI_NOR_MACRONIX
+static int macronix_quad_enable(struct udevice *dev)
+{
+ int ret, val;
+
+ val = read_sr(dev);
+ if (val < 0)
+ return val;
+
+ if (val & SR_QUAD_EN_MX)
+ return 0;
+
+ write_enable(dev);
+
+ ret = write_sr(dev, val | SR_QUAD_EN_MX);
+ if (ret < 0)
+ return ret;
+
+ if (spi_nor_wait_till_ready(dev, SNOR_READY_WAIT_PROG))
+ return 1;
+
+ ret = read_sr(dev);
+ if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) {
+ printf("spi-nor: Macronix Quad bit not set\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_SPI_NOR_SPANSION) || defined(CONFIG_SPI_NOR_WINBOND)
+static int spansion_quad_enable(struct udevice *dev)
+{
+ int ret, val;
+
+ val = read_cr(dev);
+ if (val < 0)
+ return val;
+
+ if (val & CR_QUAD_EN_SPAN)
+ return 0;
+
+ write_enable(dev);
+
+ ret = write_sr_cr(dev, val | CR_QUAD_EN_SPAN);
+ if (ret < 0)
+ return ret;
+
+ if (spi_nor_wait_till_ready(dev, SNOR_READY_WAIT_PROG))
+ return 1;
+
+ /* read back and check it */
+ ret = read_cr(dev);
+ if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
+ printf("spi-nor: Spansion Quad bit not set\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#endif
+
+static int set_quad_mode(struct udevice *dev, const struct spi_nor_info *info)
+{
+ switch (JEDEC_MFR(info)) {
+#ifdef CONFIG_SPI_NOR_MACRONIX
+ case SNOR_MFR_MACRONIX:
+ return macronix_quad_enable(dev);
+#endif
+#if defined(CONFIG_SPI_NOR_SPANSION) || defined(CONFIG_SPI_NOR_WINBOND)
+ case SNOR_MFR_SPANSION:
+ case SNOR_MFR_WINBOND:
+ return spansion_quad_enable(dev);
+#endif
+#ifdef CONFIG_SPI_NOR_STMICRO
+ case SNOR_MFR_MICRON:
+ return 0;
+#endif
+ default:
+ printf("spi-nor: Need set QEB func for %02x flash\n",
+ JEDEC_MFR(info));
+ return -1;
+ }
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+int spi_nor_decode_fdt(const void *blob, struct spi_nor *nor)
+{
+ struct udevice *dev = nor->dev;
+ struct mtd_info *mtd = mtd_get_info(dev);
+ fdt_addr_t addr;
+ fdt_size_t size;
+ int node;
+
+ /* If there is no node, do nothing */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
+ if (node < 0)
+ return 0;
+
+ addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot decode address\n", __func__);
+ return 0;
+ }
+
+ if (mtd->size != size) {
+ debug("%s: Memory map must cover entire device\n", __func__);
+ return -1;
+ }
+ nor->memory_map = map_sysmem(addr, size);
+
+ return 0;
+}
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
+
+int spi_nor_scan(struct spi_nor *nor)
+{
+ struct mtd_info *mtd = spi_nor_get_mtd_info(nor);
+ struct mtd_ops *ops = mtd_get_ops(mtd->dev);
+ const struct spi_nor_info *info = NULL;
+ int ret;
+
+ struct spi_nor_uclass_priv *upriv = dev_get_uclass_priv(nor->dev);
+ upriv->spi_nor = nor;
+
+ if (nor->init_done)
+ return 0;
+
+ info = spi_nor_id(nor->dev);
+ if (IS_ERR_OR_NULL(info)) {
+ ret = -ENOENT;
+ goto err;
+ }
+
+ /*
+ * Flash powers up read-only, so clear BP# bits.
+ *
+ * Note on some flash (like Macronix), QE (quad enable) bit is in the
+ * same status register as BP# bits, and we need preserve its original
+ * value during a reboot cycle as this is required by some platforms
+ * (like Intel ICH SPI controller working under descriptor mode).
+ */
+ if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
+ (JEDEC_MFR(info) == SNOR_MFR_SST) ||
+ (JEDEC_MFR(info) == SNOR_MFR_MACRONIX)) {
+ u8 sr = 0;
+
+ if (JEDEC_MFR(info) == SNOR_MFR_MACRONIX)
+ sr = read_sr(nor->dev) & SR_QUAD_EN_MX;
+ write_sr(nor->dev, sr);
+ }
+
+ mtd->name = info->name;
+ mtd->priv = nor;
+ mtd->type = MTD_NORFLASH;
+ mtd->writesize = 1;
+ mtd->flags = MTD_CAP_NORFLASH;
+
+ if (info->flags & E_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
+
+ if (info->flags & SST_WR)
+ nor->flags |= SNOR_F_SST_WRITE;
+
+ ops->write = spi_nor_mwrite;
+
+ /* compute the flash size */
+ nor->page_size = info->page_size;
+ /*
+ * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
+ * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
+ * the 0x4d00 Extended JEDEC code have 512b pages. All of the others
+ * have 256b pages.
+ */
+ if (JEDEC_EXT(info) == 0x4d00) {
+ if ((JEDEC_ID(info) != 0x0215) &&
+ (JEDEC_ID(info) != 0x0216))
+ nor->page_size = 512;
+ }
+ mtd->writebufsize = nor->page_size;
+ mtd->size = info->sector_size * info->n_sectors;
+
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ /* prefer "small sector" erase if possible */
+ if (info->flags & SECT_4K) {
+ nor->erase_opcode = SNOR_OP_BE_4K;
+ mtd->erasesize = 4096;
+ } else
+#endif
+ {
+ nor->erase_opcode = SNOR_OP_SE;
+ mtd->erasesize = info->sector_size;
+ }
+
+ /* Look for read opcode */
+ nor->read_opcode = SNOR_OP_READ_FAST;
+ if (nor->mode & SNOR_READ)
+ nor->read_opcode = SNOR_OP_READ;
+ else if (nor->mode & SNOR_READ_1_1_4 && info->flags & RD_QUAD)
+ nor->read_opcode = SNOR_OP_READ_1_1_4;
+ else if (nor->mode & SNOR_READ_1_1_2 && info->flags & RD_DUAL)
+ nor->read_opcode = SNOR_OP_READ_1_1_2;
+
+ /* Look for program opcode */
+ if (info->flags & WR_QPP && nor->mode & SNOR_WRITE_1_1_4)
+ nor->program_opcode = SNOR_OP_QPP;
+ else
+ /* Go for default supported write cmd */
+ nor->program_opcode = SNOR_OP_PP;
+
+ /* Set the quad enable bit - only for quad commands */
+ if ((nor->read_opcode == SNOR_OP_READ_1_1_4) ||
+ (nor->read_opcode == SNOR_OP_READ_1_1_4_IO) ||
+ (nor->program_opcode == SNOR_OP_QPP)) {
+ ret = set_quad_mode(nor->dev, info);
+ if (ret) {
+ debug("spi-nor: quad mode not supported for %02x\n",
+ JEDEC_MFR(info));
+ goto err;
+ }
+ }
+
+ nor->addr_width = 3;
+
+ /* Dummy cycles for read */
+ switch (nor->read_opcode) {
+ case SNOR_OP_READ_1_1_4_IO:
+ nor->read_dummy = 16;
+ break;
+ case SNOR_OP_READ:
+ nor->read_dummy = 0;
+ break;
+ default:
+ nor->read_dummy = 8;
+ }
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ ret = spi_nor_decode_fdt(gd->fdt_blob, nor);
+ if (ret) {
+ debug("spi-nor: FDT decode error\n");
+ goto err;
+ }
+#endif
+
+ nor->init_done = 1;
+ return 0;
+err:
+ nor->init_done = 0;
+ return ret;
+}
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 3fc2083..06541a4 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -75,6 +75,7 @@ enum uclass_id {
UCLASS_SERIAL, /* Serial UART */
UCLASS_SPI, /* SPI bus */
UCLASS_SPMI, /* System Power Management Interface bus */
+ UCLASS_SPI_NOR, /* SPI NOR flash */
UCLASS_SPI_FLASH, /* SPI flash */
UCLASS_SPI_GENERIC, /* Generic SPI flash target */
UCLASS_SYSCON, /* System configuration device */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
new file mode 100644
index 0000000..e1688e2
--- /dev/null
+++ b/include/linux/mtd/spi-nor.h
@@ -0,0 +1,217 @@
+/*
+ * SPI NOR Core header file.
+ *
+ * Copyright (C) 2016 Jagan Teki <ja...@openedev.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MTD_SPI_NOR_H
+#define __MTD_SPI_NOR_H
+
+#include <common.h>
+#include <linux/mtd/mtd.h>
+
+/*
+ * Manufacturer IDs
+ *
+ * The first byte returned from the flash after sending opcode SPINOR_OP_RDID.
+ * Sometimes these are the same as CFI IDs, but sometimes they aren't.
+ */
+#define SNOR_MFR_ATMEL 0x1f
+#define SNOR_MFR_MACRONIX 0xc2
+#define SNOR_MFR_MICRON 0x20 /* ST Micro <--> Micron */
+#define SNOR_MFR_SPANSION 0x01
+#define SNOR_MFR_SST 0xbf
+#define SNOR_MFR_WINBOND 0xef
+
+/**
+ * SPI NOR opcodes.
+ *
+ * Note on opcode nomenclature: some opcodes have a format like
+ * SNOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number
+ * of I/O lines used for the opcode, address, and data (respectively). The
+ * FUNCTION has an optional suffix of '4', to represent an opcode which
+ * requires a 4-byte (32-bit) address.
+ */
+#define SNOR_OP_WRDI 0x04 /* Write disable */
+#define SNOR_OP_WREN 0x06 /* Write enable */
+#define SNOR_OP_RDSR 0x05 /* Read status register */
+#define SNOR_OP_WRSR 0x01 /* Write status register 1 byte */
+#define SNOR_OP_READ 0x03 /* Read data bytes (low frequency) */
+#define SNOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */
+#define SNOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */
+#define SNOR_OP_READ_1_1_2_IO 0xbb /* Read data bytes (Dual IO SPI) */
+#define SNOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */
+#define SNOR_OP_READ_1_1_4_IO 0xeb /* Read data bytes (Quad IO SPI) */
+#define SNOR_OP_BRWR 0x17 /* Bank register write */
+#define SNOR_OP_BRRD 0x16 /* Bank register read */
+#define SNOR_OP_WREAR 0xC5 /* Write extended address register */
+#define SNOR_OP_RDEAR 0xC8 /* Read extended address register */
+#define SNOR_OP_PP 0x02 /* Page program (up to 256 bytes) */
+#define SNOR_OP_QPP 0x32 /* Quad Page program */
+#define SNOR_OP_BE_4K 0x20 /* Erase 4KiB block */
+#define SNOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
+#define SNOR_OP_BE_32K 0x52 /* Erase 32KiB block */
+#define SPINOR_OP_CHIP_ERASE 0xc7 /* Erase whole flash chip */
+#define SNOR_OP_SE 0xd8 /* Sector erase (usually 64KiB) */
+#define SNOR_OP_RDID 0x9f /* Read JEDEC ID */
+#define SNOR_OP_RDCR 0x35 /* Read configuration register */
+#define SNOR_OP_RDFSR 0x70 /* Read flag status register */
+
+/* Used for SST flashes only. */
+#define SNOR_OP_BP 0x02 /* Byte program */
+#define SNOR_OP_AAI_WP 0xad /* Auto addr increment word program */
+
+/* Status Register bits. */
+#define SR_WIP BIT(0) /* Write in progress */
+#define SR_WEL BIT(1) /* Write enable latch */
+
+/* meaning of other SR_* bits may differ between vendors */
+#define SR_BP0 BIT(2) /* Block protect 0 */
+#define SR_BP1 BIT(3) /* Block protect 1 */
+#define SR_BP2 BIT(4) /* Block protect 2 */
+#define SR_SRWD BIT(7) /* SR write protect */
+
+#define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */
+
+/* Flag Status Register bits */
+#define FSR_READY BIT(7)
+
+/* Configuration Register bits. */
+#define CR_QUAD_EN_SPAN BIT(1) /* Spansion/Winbond Quad I/O */
+
+/* Flash timeout values */
+#define SNOR_READY_WAIT_PROG (2 * CONFIG_SYS_HZ)
+#define SNOR_READY_WAIT_ERASE (5 * CONFIG_SYS_HZ)
+#define SNOR_MAX_CMD_SIZE 4
+#define SNOR_16MB_BOUN 0x1000000
+
+/**
+ * struct spi_nor_uclass_priv - Holds information about a device used by the
uclass
+ */
+struct spi_nor_uclass_priv {
+ struct spi_nor *spi_nor;
+};
+
+enum snor_option_flags {
+ SNOR_F_SST_WRITE = BIT(0),
+ SNOR_F_USE_FSR = BIT(1),
+ SNOR_F_U_PAGE = BIT(1),
+};
+
+enum mode {
+ SNOR_READ = BIT(0),
+ SNOR_READ_1_1_2 = BIT(1),
+ SNOR_READ_1_1_4 = BIT(2),
+ SNOR_READ_1_1_2_IO = BIT(3),
+ SNOR_READ_1_1_4_IO = BIT(4),
+ SNOR_WRITE_1_1_BYTE = BIT(5),
+ SNOR_WRITE_1_1_4 = BIT(6),
+};
+
+#define JEDEC_MFR(info) ((info)->id[0])
+#define JEDEC_ID(info) (((info)->id[1]) << 8 | ((info)->id[2]))
+#define JEDEC_EXT(info) (((info)->id[3]) << 8 | ((info)->id[4]))
+#define SPI_NOR_MAX_ID_LEN 6
+
+struct spi_nor_info {
+ char *name;
+
+ /*
+ * This array stores the ID bytes.
+ * The first three bytes are the JEDIC ID.
+ * JEDEC ID zero means "no ID" (mostly older chips).
+ */
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ u8 id_len;
+
+ /* The size listed here is what works with SNOR_OP_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned sector_size;
+ u16 n_sectors;
+
+ u16 page_size;
+
+ u16 flags;
+#define SECT_4K BIT(0)
+#define E_FSR BIT(1)
+#define SST_WR BIT(2)
+#define WR_QPP BIT(3)
+#define RD_QUAD BIT(4)
+#define RD_DUAL BIT(5)
+#define RD_QUADIO BIT(6)
+#define RD_DUALIO BIT(7)
+#define RD_FULL (RD_QUAD | RD_DUAL | RD_QUADIO |
RD_DUALIO)
+};
+
+extern const struct spi_nor_info spi_nor_ids[];
+
+/**
+ * struct spi_nor - Structure for defining a the SPI NOR layer
+ *
+ * @dev: SPI NOR device
+ * @name: name of the SPI NOR device
+ * @page_size: the page size of the SPI NOR
+ * @addr_width: number of address bytes
+ * @erase_opcode: the opcode for erasing a sector
+ * @read_opcode: the read opcode
+ * @read_dummy: the dummy bytes needed by the read operation
+ * @program_opcode: the program opcode
+ * @max_write_size: If non-zero, the maximum number of bytes which can
+ * be written at once, excluding command bytes.
+ * @flags: flag options for the current SPI-NOR (SNOR_F_*)
+ * @mode: read, write mode or any other mode bits.
+ * @read_mode: read mode.
+ * @cmd_buf: used by the write_reg
+ * @read_reg: [DRIVER-SPECIFIC] read out the register
+ * @write_reg: [DRIVER-SPECIFIC] write data to the register
+ * @read: [DRIVER-SPECIFIC] read data from the SPI NOR
+ * @write: [DRIVER-SPECIFIC] write data to the SPI NOR
+ * @memory_map: address of read-only SPI NOR access
+ */
+struct spi_nor {
+ struct udevice *dev;
+ const char *name;
+ u8 init_done;
+ u32 page_size;
+ u8 addr_width;
+ u8 erase_opcode;
+ u8 read_opcode;
+ u8 read_dummy;
+ u8 program_opcode;
+ u32 max_write_size;
+ u32 flags;
+ u8 mode;
+ u8 read_mode;
+ u8 cmd_buf[SNOR_MAX_CMD_SIZE];
+
+ void *memory_map;
+};
+
+struct spi_nor_ops {
+ int (*read_reg)(struct udevice *dev, u8 cmd, u8 *val, int len);
+ int (*write_reg)(struct udevice *dev, u8 cmd, u8 *data, int len);
+
+ int (*read)(struct udevice *dev, loff_t from, size_t len,
+ u_char *buf);
+ int (*write)(struct udevice *dev, loff_t to, size_t len,
+ const u_char *buf);
+};
+
+#define spi_nor_get_ops(dev) ((struct spi_nor_ops *)(dev)->driver->ops)
+
+int spi_nor_merase(struct udevice *dev, struct erase_info *instr);
+int spi_nor_mread(struct udevice *dev, loff_t from, size_t len,
+ size_t *retlen, u_char *buf);
+
+int spi_nor_scan(struct spi_nor *nor);
+int spi_nor_bind(struct udevice *dev, struct spi_nor *nor);
+
+struct spi_nor *find_spi_nor_device(int dev_num);
+int get_spi_nor_num(void);
+struct spi_nor *spi_nor_get_spi_nor_dev(struct udevice *dev);
+struct mtd_info *spi_nor_get_mtd_info(struct spi_nor *nor);
+
+#endif /* __MTD_SPI_NOR_H */
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
