On Mon, Dec 25, 2017 at 09:34:03PM -0600, Derald D. Woods wrote: > On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote: > > This series adds OF_CONTROL support for TMDSEVM{3530,3730} and > > additionally updates ethaddr setup with smc911x initialization. > > > > Devicetree files are taken from Linux v4.15-rc3. Note that this is the > > first addition of OMAP34XX devicetree files. > > > > Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb] > > > > --- 8< ----------------------------------------------------------------- > > U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10) > > Trying to boot from MMC1 > > reading u-boot.img > > reading u-boot.img > > > > > > U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600) > > > > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz > > Model: TI OMAP35XX EVM (TMDSEVM3530) > > OMAP3 EVM board + LPDDR/NAND > > I2C: ready > > DRAM: 256 MiB > > NAND: 256 MiB > > MMC: OMAP SD/MMC: 0 > > Read back SMSC id 0x92200000 > > OMAP die ID: 265a002400000000040365fa1801b01f > > Net: smc911x-0 > > starting USB... > > USB0: USB EHCI 1.00 > > scanning bus 0 for devices... 1 USB Device(s) found > > Hit any key to stop autoboot: 0 > > OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr > > serial@4806a000 > > serial@4806a000 > > serial@4806a000 > > --- 8< ----------------------------------------------------------------- > > > > > > Derald D. Woods (3): > > ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730} > > ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730} > > ARM: omap3: evm: Refactor 'board_eth_init' > > > > arch/arm/dts/Makefile | 4 + > > arch/arm/dts/omap-gpmc-smsc911x.dtsi | 55 ++++++ > > arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 29 ++++ > > arch/arm/dts/omap3-evm-37xx.dts | 110 ++++++++++++ > > arch/arm/dts/omap3-evm-common.dtsi | 195 +++++++++++++++++++++ > > arch/arm/dts/omap3-evm-processor-common.dtsi | 216 > > ++++++++++++++++++++++++ > > arch/arm/dts/omap3-evm-u-boot.dtsi | 29 ++++ > > arch/arm/dts/omap3-evm.dts | 89 ++++++++++ > > arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 73 ++++++++ > > arch/arm/dts/omap34xx.dtsi | 84 +++++++++ > > arch/arm/mach-omap2/omap3/Kconfig | 4 + > > board/ti/evm/evm.c | 24 +-- > > configs/omap3_evm_defconfig | 9 +- > > include/configs/omap3_evm.h | 2 - > > 14 files changed, 896 insertions(+), 27 deletions(-) > > create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi > > create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi > > create mode 100644 arch/arm/dts/omap3-evm-37xx.dts > > create mode 100644 arch/arm/dts/omap3-evm-common.dtsi > > create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi > > create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi > > create mode 100644 arch/arm/dts/omap3-evm.dts > > create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi > > create mode 100644 arch/arm/dts/omap34xx.dtsi > > > > -- > > 2.15.1 > > > > Ping. If there is any concern, please let me know and I will make > corrections. I plan to also update beagleboard and overo to use their > respective devicetree files. I would like to have these three OMAP34XX > boards, that I possess, to be near the same level of support. It will > help me to continue testing OMAP34XX stuff in general.
It's localized enough that it's your call, do you want it in for v2018.01 or .03? Thanks! -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot