On Tuesday 12 January 2010 11:07:13 anupbeh...@gmail.com wrote: > I am using PPC440GX and DIMM SDRAM.
OK, so you are using the code cpu/ppc4xx/44x_spd_ddr.c to configure the SDRAM controller. You should enable DEBUG in this code to see a bit more about the configuration. BTW: I suggest you take a look at the ocotea SDRAM config options set in include/configs/ocotea.h. You should for example set CONFIG_PROG_SDRAM_TLB and then remove the SDRAM TLB entries from your init.S. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
