On Tuesday 12 January 2010 08:02:51 anupbeh...@gmail.com wrote: > I begin use U-Boot at my custom board based on ppc440x5.
What kind of PPC4xx ist this? PPC440EPx? > Here is Mem Info that we are using on board: > > 16MB Nor flash with base address 0xfc000000 > 512MB DDR with base addr 0x00000000 > 256kb ISRAM with base addr 0xc0000000 > > TEXT_BASE 0xfffc0000 > > Tlb entries for board is: > tlbentry( 0xff000000, SZ_16M, 0xff000000, 0, AC_R|AC_X|AC_W) ------Flash > tlbentry( 0xc0000000, SZ_256K, 0xc0000000, 0, AC_R|AC_W|AC_X|SA_I) > ------ISRAM > tlbentry( 0x00000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_I|SA_G) > ------DDR > tlbentry( 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_I|SA_G) > ------DDR > > > I am trying to get a clean build of U-Boot to run on the PPC440x5 based > customized board. I have the latest versions U-Boot. > The system executes through board_init_f( ) without any problems, and gets > into board_init_r( ). The console output is as follows: > > 512 MB (ECC is ON, 400 MHz, CL 7) > Top of RAM usable for U-Boot at: 20000000 > Reserving 170k for U-Boot at: 1ffd5000 > Reserving 1040k for malloc() at: 1fed1000 > Reserving 128 Bytes for Board Info at: 1fed0f80 > Reserving 64 Bytes for Global Data at: 1fed0f40 > Stack Pointer at: 1fed0f28 > New Stack Pointer is: 1fed0f28 > relocate addr_sp = 1fed0f28, id = 1fed0f40, addr = 1ffd5000 > > Now running in RAM - U-Boot at: 1ffd5000 > > NIP: 1FFD7764 XER: 00000000 LR: 1FFD7764 REGS: 1fed0e20 TRAP: 0200 DEAR: > FFED0F18 > MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00 > > GPR00: 1FFD7338 1FED0F10 1FED0F40 1FFD5000 1FFD88E0 00000000 00000000 > 1FFD7764 > GPR08: 00000600 00002098 00000030 2FAF07FE FFFFFFFF C000B330 20002A00 > 20015000 > GPR16: 00000000 00000000 00000000 00000000 48FF2422 00000610 00002C20 > 00000000 > GPR24: 00000000 1FED0F40 1FFD5000 1FED5000 1FED0F80 1FFD5000 20002B10 > 1FED1000 > Call backtrace: > 1FFD88D8 1FFD76D8 00000000 > machine check When U-Boot crashes/hangs upon relocation to SDRAM, you most likely have a problem with your SDRAM configuration. Again, which CPU are you using? How is the SDRAM connected (DIMM or onboard). I suggest you check your SDRAM controller setup again. > Here I am trying to use backtrace to debug but system is waiting at > folloing console o/p. > > [r...@u-boot]$ cp ../../11dec_rec/u-boot/backtrace . > [r...@u-boot]$backtrace System.map 0xdffeb000 > Reading symbols from System.map > Using Address Offset 0xdffeb000 This link might help: http://www.denx.de/wiki/DULG/DebuggingUBoot Especially chapter 10.1.2. Debugging of U-Boot After Relocation. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
