On Tue, Dec 12, 2017 at 1:28 PM, Maxime Ripard <maxime.rip...@free-electrons.com> wrote: > Hi, > > On Tue, Dec 12, 2017 at 12:28:16PM +0530, Jagan Teki wrote: >> AXP803 another PMIC produced by x-powers and paired with >> A64 via RSB bus. >> >> unlike other axp chip's support in SPL this is only added >> for U-Boot proper since SPL on A64 has no space to add anything. > > How do you setup the CPU and DRAM regulators then? > >> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> >> --- >> arch/arm/mach-sunxi/Makefile | 9 ++ >> arch/arm/mach-sunxi/pmic_bus.c | 9 +- >> arch/arm/mach-sunxi/rsb.c | 2 +- >> board/sunxi/board.c | 40 +++++++ >> drivers/power/Kconfig | 95 ++++++++++----- >> drivers/power/Makefile | 3 + >> drivers/power/axp803.c | 260 >> +++++++++++++++++++++++++++++++++++++++++ >> include/axp803.h | 68 +++++++++++ >> include/axp_pmic.h | 4 + >> 9 files changed, 458 insertions(+), 32 deletions(-) >> create mode 100644 drivers/power/axp803.c >> create mode 100644 include/axp803.h >> >> diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile >> index 2a3c379..aedf22f 100644 >> --- a/arch/arm/mach-sunxi/Makefile >> +++ b/arch/arm/mach-sunxi/Makefile >> @@ -19,9 +19,15 @@ endif >> obj-$(CONFIG_MACH_SUN6I) += prcm.o >> obj-$(CONFIG_MACH_SUN8I) += prcm.o >> obj-$(CONFIG_MACH_SUN9I) += prcm.o >> +ifndef CONFIG_SPL_BUILD >> +obj-$(CONFIG_MACH_SUN50I) += prcm.o >> +endif > > The number of lines here is starting to be a bit ridiculous, please > make a Kconfig option selected by the SoC families.
as of now there was no Kconfig option for prcm, we shouldn't build this for SPL because of size limitation. -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot