Hi Simon, Am 24.11.2017 um 23:35 schrieb Simon Glass: > On 22 November 2017 at 06:25, Neil Armstrong <narmstr...@baylibre.com> wrote: >> +Go back to mainline U-Boot source tree then : >> + > mkdir fip >> + >> + > cp $FIPDIR/gxl/bl2.bin fip/ >> + > cp $FIPDIR/gxl/acs.bin fip/ >> + > cp $FIPDIR/gxl/bl21.bin fip/ >> + > cp $FIPDIR/gxl/bl30.bin fip/ >> + > cp $FIPDIR/gxl/bl301.bin fip/ >> + > cp $FIPDIR/gxl/bl31.img fip/ >> + > cp u-boot.bin fip/bl33.bin >> + >> + > $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + > $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output >> fip/bl2.n.bin.sig >> + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> + >> +and then write the image to SD with: >> + >> + > DEV=/dev/your_sd_device >> + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 >> seek=1 >> + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > > This bit (from 'got back to U-Boot sources') seems like a job for > binman, as I just mentioned in the other patch.
I'm not familiar with binman either but would like to point out that I've authored Open Source meson-tools for GXBB that could/should/will be adapted to GXL at some point, too. https://github.com/afaerber/meson-tools So I'll be strictly opposed to hiding the above instructions from users or to hardcoding the use of non-free x86_64-only tools inside U-Boot! Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
