My motivation is to complete syncing the Denali driver with Linux.
However, the last sync of NAND core was Linux 4.6
so a lots of parts are missing in U-Boot.
I imported the following:
- NAND_ECC_MAXIMIZE flag
- nand_data_interface
- sync nand_timings
- NAND_ECC_CUSTOM_PAGE_ACCESS
- mtd_ooblayout_xxx()
- chip->buf_align
- helpers to match ECC requirement
- NAND_ROW_ADDR_3
The blind syncing often broke drivers.
Forcible syncing often broke drivers in the past.
This time, I imported necessary commits one by one.
I put the corresponding commit ID in Linux.
And, it should be easy to review that the existing drivers
are not affected.
Lastly, I updated the Denali driver.
I tested it on my boards and worked for me.
It is nicely synced with Linux.
Boris Brezillon (9):
mtd: nand: Add an option to maximize the ECC strength
mtd: nand: automate NAND timings selection
mtd: nand: Fix data interface configuration logic
mtd: nand: Add a few more timings to nand_sdr_timings
mtd: add mtd_ooblayout_xxx() helper functions
mtd: nand: Drop unused cached programming support
mtd: nand: Drop the ->errstat() hook
mtd: nand: Wait for PAGEPROG to finish in drivers setting
NAND_ECC_CUSTOM_PAGE_ACCESS
mtd: nand: Pass the CS line to ->setup_data_interface()
Marc Gonzalez (1):
mtd: nand: Support controllers with custom page
Masahiro Yamada (7):
bitops: collect BIT macros to include/linux/bitops.h
mtd: nand: add onfi_* stubs in case ONFI_DETECTION is disabled
mtd: nand: allow drivers to request minimum alignment for passed
buffer
mtd: nand: add generic helpers to check, match, maximize ECC settings
mtd: nand: add a shorthand to generate nand_ecc_caps structure
mtd: nand: introduce NAND_ROW_ADDR_3 flag
mtd: nand: denali: sync with Linux 4.15-rc1
Sascha Hauer (5):
mtd: nand: remove unnecessary 'extern' from function declarations
mtd: nand: Create a NAND reset function
mtd: nand: Introduce nand_data_interface
mtd: nand: convert ONFI mode into data interface
mtd: nand: Expose data interface for ONFI mode 0
arch/arm/include/asm/arch-sunxi/dram_sunxi_dw.h | 3 +-
arch/arm/mach-kirkwood/include/mach/gpio.h | 4 -
drivers/gpio/kw_gpio.c | 2 +-
drivers/mtd/mtdcore.c | 360 ++++
drivers/mtd/nand/Kconfig | 11 -
drivers/mtd/nand/davinci_nand.c | 10 +-
drivers/mtd/nand/denali.c | 2028 ++++++++++++-----------
drivers/mtd/nand/denali.h | 473 ++----
drivers/mtd/nand/denali_dt.c | 17 +-
drivers/mtd/nand/denali_spl.c | 14 +-
drivers/mtd/nand/nand_base.c | 530 +++++-
drivers/mtd/nand/nand_timings.c | 494 +++---
include/linux/bitops.h | 7 +
include/linux/mtd/mtd.h | 57 +
include/linux/mtd/nand.h | 314 +++-
include/usb/lin_gadget_compat.h | 4 +-
16 files changed, 2685 insertions(+), 1643 deletions(-)
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
