On Tuesday 21 November 2017 06:14 PM, Tom Rini wrote:
> On Tue, Nov 14, 2017 at 04:12:31PM +0530, Faiz Abbas wrote:
>> The dra7xx series of SOCs contain a temperature sensor and an
>> associated analog-to-digital converter (ADC) which produces
>> an output which is proportional to the SOC temperature.
>> Add support for this temperature sensor.
>>
>> Signed-off-by: Faiz Abbas <faiz_ab...@ti.com>
>> Reviewed-by: Simon Glass <s...@chromium.org>
>> ---
>>
>> v5:
>> Added terminator brackets ({}) to ti_bandgap_match[]
>>
>> v3:
>> Added Reviewed-by comment
>>
>> v2:
>> 1. Removed extra elements from ti_bandgap
>> 2. Changed base address to ulong
>> 3. Changed to udev to dev to maintain consistency
>> 4. minor format changes
>>
>> common/spl/Kconfig | 8 +
>> .../thermal/ti_soc_thermal.txt | 35 ++++
>> drivers/Makefile | 1 +
>> drivers/thermal/Kconfig | 6 +
>> drivers/thermal/Makefile | 1 +
>> drivers/thermal/ti-bandgap.c | 198
>> +++++++++++++++++++++
>> 6 files changed, 249 insertions(+)
>> create mode 100644 doc/device-tree-bindings/thermal/ti_soc_thermal.txt
>> create mode 100644 drivers/thermal/ti-bandgap.c
>>
>
> This fails to build on am57xx_evm_nodt. Lokesh, does it still make
> sense to have that defconfig? If so, we need to disable this feature on
> that config, or we need to delete that config then apply this series.
> Thanks!
>
Right, no point keeping am57xx_evm_nodt. We should delete this config
and apply this series.
Thanks and regards,
Lokesh
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
