On Fri, Nov 03, 2017 at 09:30:30AM +0100, Marek Szyprowski wrote: > Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI, > no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO > button. USB3.0 ports are used for build-in JMicron USB to SATA bridge > and Gigabit R8152 ethernet chips. HC1 uses only passive cooling. > > This patch also updates Odroid's ADCmax array and reduces ADC tolerance > to 1% to ensure that XU4 and HC1 revisions are properly detected. > > I've tested this with XU3, XU3-lite, XU4 and HC1 boards. In case of my test > boards I got following values from ADC register: 372, 370, 1281 and 1313. > > Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com> > --- > board/samsung/common/exynos5-dt-types.c | 27 ++++++++++++++++++++------- > board/samsung/common/exynos5-dt.c | 4 ++-- > configs/odroid-xu3_defconfig | 2 +- > include/samsung/exynos5-dt-types.h | 2 ++ > 4 files changed, 25 insertions(+), 10 deletions(-) >
Tested on Odroid HC1 with tftpboot: Tested-by: Krzysztof Kozlowski <k...@kernel.org> Best regards, Krzysztof _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
