Initial platform creation for NIZYNQ.
Signed-off-by: Joe Hershberger <[email protected]>
Signed-off-by: Keng Soon Cheah <[email protected]>
Signed-off-by: Wilson Lee <[email protected]>
Cc: Chen Yee Chew <[email protected]>
Cc: Albert Aribaud <[email protected]>
---
arch/arm/Kconfig | 15 +++++++++++++++
arch/arm/Makefile | 4 +++-
board/ni/Kconfig | 13 +++++++++++++
3 files changed, 31 insertions(+), 1 deletion(-)
create mode 100644 board/ni/Kconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 83b7aa5..ae34821 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -767,6 +767,20 @@ config ARCH_ZYNQMP
select DM_USB if USB
imply FAT_WRITE
+config NIZYNQ
+ bool "National Instruments zynq Platform"
+ select CPU_V7
+ select SUPPORT_SPL
+ select OF_CONTROL
+ select SPL_OF_CONTROL if SPL
+ select DM
+ select DM_ETH
+ select DM_GPIO
+ select SPL_DM if SPL
+ select DM_MMC
+ select DM_SERIAL
+ select SPL_SEPARATE_BSS if SPL
+
config TEGRA
bool "NVIDIA Tegra"
imply FAT_WRITE
@@ -1258,6 +1272,7 @@ source "board/hisilicon/hikey/Kconfig"
source "board/hisilicon/poplar/Kconfig"
source "board/imx31_phycore/Kconfig"
source "board/isee/igep003x/Kconfig"
+source "board/ni/Kconfig"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/ppcag/bg0900/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 0e0ae77..fbc271a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -74,7 +74,9 @@ machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_STM32) += stm32
machine-$(CONFIG_TEGRA) += tegra
machine-$(CONFIG_ARCH_UNIPHIER) += uniphier
-machine-$(CONFIG_ARCH_ZYNQ) += zynq
+ifneq (,$(findstring y,$(CONFIG_ZYNQ)$(CONFIG_NIZYNQ)))
+machine-y += zynq
+endif
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
diff --git a/board/ni/Kconfig b/board/ni/Kconfig
new file mode 100644
index 0000000..382a544
--- /dev/null
+++ b/board/ni/Kconfig
@@ -0,0 +1,13 @@
+if NIZYNQ
+choice
+ prompt "NI Zynq board select"
+
+endchoice
+
+config SYS_VENDOR
+ default "ni"
+
+config SYS_SOC
+ default "zynq"
+
+endif
--
2.7.4
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
