From: Manish Narani <manish.nar...@xilinx.com>
This patch adds CCI support for USB when CCI is enabled in design.
This patch also adds 'reg' property for Xilinx USB 3.0 IP. The 'reg'
property is added in order to modify a register in that to enable
coherency in Hardware.
Also add address to unit name to avoid dtc warning
Signed-off-by: Manish Narani <mnar...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
arch/arm/dts/zynqmp.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index dce5da4e06e5..7def14d95a88 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -1011,11 +1011,12 @@
power-domains = <&pd_uart1>;
};
- usb0: usb0 {
+ usb0: usb0@ff9d0000 {
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
compatible = "xlnx,zynqmp-dwc3";
+ reg = <0x0 0xff9d0000 0x0 0x100>;
clock-names = "bus_clk", "ref_clk";
clocks = <&clk125>, <&clk125>;
#stream-id-cells = <1>;
@@ -1033,14 +1034,16 @@
interrupts = <0 65 4>;
/* snps,quirk-frame-length-adjustment = <0x20>;
*/
snps,refclk_fladj;
+ /* dma-coherent; */
};
};
- usb1: usb1 {
+ usb1: usb1@ff9e0000 {
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
compatible = "xlnx,zynqmp-dwc3";
+ reg = <0x0 0xff9e0000 0x0 0x100>;
clock-names = "bus_clk", "ref_clk";
clocks = <&clk125>, <&clk125>;
#stream-id-cells = <1>;
@@ -1058,6 +1061,7 @@
interrupts = <0 70 4>;
/* snps,quirk-frame-length-adjustment = <0x20>;
*/
snps,refclk_fladj;
+ /* dma-coherent; */
};
};
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
