Recently logic to enable RGMII TX-delay was changed by
commit 05b29aa0cb68 ("net: phy: realtek: fix enabling of the TX-delay
for RTL8211F")
Based on this, here we are enabling the TX-delay again using
PHY_INTERFACE_MODE_RGMII_TXID.
Signed-off-by: Calvin Johnson <calvin.john...@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlm...@nxp.com>
---
board/freescale/ls1012ardb/eth.c | 2 +-
drivers/net/pfe_eth/pfe_eth.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c
index 286bc8a..c0f6306 100644
--- a/board/freescale/ls1012ardb/eth.c
+++ b/board/freescale/ls1012ardb/eth.c
@@ -62,7 +62,7 @@ int board_eth_init(bd_t *bis)
/* MAC2 */
ls1012a_set_mdio(1, miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME));
ls1012a_set_phy_address_mode(1, EMAC2_PHY_ADDR,
- PHY_INTERFACE_MODE_RGMII);
+ PHY_INTERFACE_MODE_RGMII_TXID);
cpu_eth_init(bis);
#endif
diff --git a/drivers/net/pfe_eth/pfe_eth.c b/drivers/net/pfe_eth/pfe_eth.c
index 8d8de40..4db823f 100644
--- a/drivers/net/pfe_eth/pfe_eth.c
+++ b/drivers/net/pfe_eth/pfe_eth.c
@@ -27,7 +27,7 @@ struct gemac_s gem_info[] = {
/* phy iface */
.phy_address = EMAC2_PHY_ADDR,
- .phy_mode = PHY_INTERFACE_MODE_RGMII,
+ .phy_mode = PHY_INTERFACE_MODE_RGMII_TXID,
},
};
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
