On 09/14/2017 02:26 PM, York Sun wrote: > On 08/30/2017 03:43 AM, Shengzhou Liu wrote: >> Signed-off-by: Shengzhou Liu <shengzhou....@nxp.com> >> --- >> include/configs/ls1043a_common.h | 11 ++++++++++- >> 1 file changed, 10 insertions(+), 1 deletion(-) >> >> diff --git a/include/configs/ls1043a_common.h >> b/include/configs/ls1043a_common.h >> index f064d5c24a..976c031574 100644 >> --- a/include/configs/ls1043a_common.h >> +++ b/include/configs/ls1043a_common.h >> @@ -281,6 +281,8 @@ >> "fdt_addr_r=0x90000000\0" \ >> "load_addr=0xa0000000\0" \ >> "kernel_size=0x2800000\0" \ >> + "kernel_addr_sd=0x8000\0" \ >> + "kernel_size_sd=0x14000\0" \ >> "console=ttyS0,115200\0" \ >> "mtdparts=" MTDPARTS_DEFAULT "\0" \ >> BOOTENV \ >> @@ -318,12 +320,19 @@ >> "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \ >> "nor_bootcmd=echo Trying load from nor..;" \ >> "cp.b $kernel_addr $load_addr " \ >> - "$kernel_size && bootm $load_addr#$board\0" >> + "$kernel_size && bootm $load_addr#$board\0" \ >> + "sd_bootcmd=echo Trying load from SD ..;" \ >> + "mmcinfo; mmc read $load_addr " \ >> + "$kernel_addr_sd $kernel_size_sd ;" \ >> + " bootm $load_addr#$board\0" >> > > Shouldn't you be using "&&" instead of ";" between commands? >
Shengzhou, Are you going to update the patches? York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
