Hi, On 26/09/17 01:28 AM, Siva Durga Prasad Paladugu wrote: > Hi, > >> -----Original Message----- >> From: Jagan Teki [mailto:jagannadh.t...@gmail.com] >> Sent: Tuesday, September 26, 2017 10:17 AM >> To: Liam Beguin <liambeg...@gmail.com> >> Cc: u-boot@lists.denx.de; Michal Simek <mich...@xilinx.com>; Siva Durga >> Prasad Paladugu <siva...@xilinx.com> >> Subject: Re: [U-Boot] ZynqMP qspi >> >> On Tue, Sep 26, 2017 at 9:07 AM, Liam Beguin <liambeg...@gmail.com> >> wrote: >>> >>> Resending with proper CC since the email came back. >>> >>> On 24/09/17 09:36 PM, Liam Beguin wrote: >>>> Hi, >>>> >>>> I'm testing a new Xilinx zynqmp dev board and was not able to probe >>>> the qspi with the latest mainline U-Boot. I see that there is a >> 'zynqmp_qspi' >>>> driver in the Xilinx tree [1] but nothing in mainline. After a little >>>> digging, I found a thread on the list [2] (and [3]) and was wondering >>>> in what state this was now. > > I am planning to send the new series in 1-2 weeks, probably you can wait till > then or > you can try with the patch[2] and see if you are able to get it working with > those( those > are known to be working when I sent ). Also, please note that as of now iam > targeting > only for qspi single mode not the dual modes. >
Great, I'll wait for your series and test it as soon as it comes out. Thanks, Liam > Thanks, > Siva > >>>> >>>> [1] >>>> https://github.com/Xilinx/u-boot- >> xlnx/blob/master/drivers/spi/zynqmp_ >>>> qspi.c [2] >>>> https://lists.denx.de/pipermail/u-boot/2016-July/261003.html >>>> [3] https://lists.denx.de/pipermail/u-boot/2016- >> November/273650.html >> >> I think, Siva is working on it. and he would be best to comment this. >> >> thanks! >> -- >> Jagan Teki >> Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream >> Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
