Hi, > -----Original Message----- > From: Jagan Teki [mailto:jagannadh.t...@gmail.com] > Sent: Tuesday, September 26, 2017 10:17 AM > To: Liam Beguin <liambeg...@gmail.com> > Cc: u-boot@lists.denx.de; Michal Simek <mich...@xilinx.com>; Siva Durga > Prasad Paladugu <siva...@xilinx.com> > Subject: Re: [U-Boot] ZynqMP qspi > > On Tue, Sep 26, 2017 at 9:07 AM, Liam Beguin <liambeg...@gmail.com> > wrote: > > > > Resending with proper CC since the email came back. > > > > On 24/09/17 09:36 PM, Liam Beguin wrote: > >> Hi, > >> > >> I'm testing a new Xilinx zynqmp dev board and was not able to probe > >> the qspi with the latest mainline U-Boot. I see that there is a > 'zynqmp_qspi' > >> driver in the Xilinx tree [1] but nothing in mainline. After a little > >> digging, I found a thread on the list [2] (and [3]) and was wondering > >> in what state this was now.
I am planning to send the new series in 1-2 weeks, probably you can wait till then or you can try with the patch[2] and see if you are able to get it working with those( those are known to be working when I sent ). Also, please note that as of now iam targeting only for qspi single mode not the dual modes. Thanks, Siva > >> > >> [1] > >> https://github.com/Xilinx/u-boot- > xlnx/blob/master/drivers/spi/zynqmp_ > >> qspi.c [2] > >> https://lists.denx.de/pipermail/u-boot/2016-July/261003.html > >> [3] https://lists.denx.de/pipermail/u-boot/2016- > November/273650.html > > I think, Siva is working on it. and he would be best to comment this. > > thanks! > -- > Jagan Teki > Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream > Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
