Marek, do you know whether there's an update of the DWC3 driver planned to get us back in sync with the kernel driver?
Thanks, Philipp. > On 12 Sep 2017, at 07:02, Kever Yang <kever.y...@rock-chips.com> wrote: > > Philipp, > > I believe there are some request I think is not reasonable which stop me > from update new patch sets. > > The usb/dwc3 is mess up now, separate in host mode and gadget mode, one need > init in board init > > while another use DM. When I want to add a new feature like use 16bit UTMI+ > instead of 8bit(which suppose to be very very simple), > > I don't think the maintainer have an idea where it should go and how it > should be, and the driver now > > it's far away from upstream kernel. > > I have send 4 patch set for this, everything should be clear, but... > > > > Thanks, > - Kever > On 09/11/2017 09:30 PM, Philipp Tomsich wrote: >> >> Kever, >> >> What is the status on this patch (and the encapsulating series)? >> This seems to be stuck in 'changes requested' for about a year now... >> >> Thanks, >> Philipp. >> >> On Thu, 1 Sep 2016, Kever Yang wrote: >> >>> The dwc3 controller is using 8 bit UTMI+ interface for USB2.0 PHY, >>> add one variable in dwc3/dwc3_device struct to support 16 bit >>> UTMI+ interface on some SoCs like Rockchip rk3399. >>> >>> Signed-off-by: Kever Yang <kever.y...@rock-chips.com> >>> --- >>> >>> Changes in v4: >>> - use 1 bit for usb2_phyif_utmi_width instead of 5bit >>> >>> Changes in v3: >>> - Parse the DT for utmi+ interface width in dwc3 driver >>> >>> Changes in v2: >>> - use a variable to identify utmi+ bus width instead of CONFIG MACRO >>> >>> drivers/usb/dwc3/core.c | 19 +++++++++++++++++++ >>> drivers/usb/dwc3/core.h | 12 ++++++++++++ >>> 2 files changed, 31 insertions(+) >>> >> > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
