Philipp,

I believe there are some request I think is not reasonable which stop me from update new patch sets.

The usb/dwc3 is mess up now, separate in host mode and gadget mode, one need init in board init

while another use DM. When I want to add a new feature like use 16bit UTMI+ instead of 8bit(which suppose to be very very simple),

I don't think the maintainer have an idea where it should go and how it should be, and the driver now

it's far away from upstream kernel.

I have send 4 patch set for this, everything should be clear, but...



Thanks,
- Kever
On 09/11/2017 09:30 PM, Philipp Tomsich wrote:

Kever,

What is the status on this patch (and the encapsulating series)?
This seems to be stuck in 'changes requested' for about a year now...

Thanks,
Philipp.

On Thu, 1 Sep 2016, Kever Yang wrote:

The dwc3 controller is using 8 bit UTMI+ interface for USB2.0 PHY,
add one variable in dwc3/dwc3_device struct to support 16 bit
UTMI+ interface on some SoCs like Rockchip rk3399.

Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---

Changes in v4:
- use 1 bit for usb2_phyif_utmi_width instead of 5bit

Changes in v3:
- Parse the DT for utmi+ interface width in dwc3 driver

Changes in v2:
- use a variable to identify utmi+ bus width instead of CONFIG MACRO

drivers/usb/dwc3/core.c | 19 +++++++++++++++++++
drivers/usb/dwc3/core.h | 12 ++++++++++++
2 files changed, 31 insertions(+)




_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to