On Tue, Aug 8, 2017 at 10:27 AM, Chris Packham <judge.pack...@gmail.com> wrote: > "jedec,spi-nor" is used by Linux for many boards with spi flash. In fact > according to the binding documentation this must be included for any SPI > NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). > Make device trees more portable between Linux an U-Boot by supporting > "jedec,spi-nor" in addition to the U-Boot specific "spi-flash". > > Signed-off-by: Chris Packham <judge.pack...@gmail.com> > --- > This fixes my issues with the spi speed selection on db-88f6820-amc. I > didn't find anything in the commit message from the initial > implementation saying that "jedec,spi-nor" was omitted intentionally so > I've settled on this instead of updating armada-385-amc.dts. > > If there is a good reason not to make this change I'm happy to submit a patch > that just updates armada-385-amc.dts.
At this point try to use spi-flash in dts since we're in WIP for spi-nor support once ie in-place then only we have sync the compatible of what Linux is using. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot