There is not LDO_SOC/PU/ARM/MMDC1 on i.MX6SLL, also no need to gate/ungate
all PFDs to make PFD working.
Signed-off-by: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Fabio Estevam <fabio.este...@nxp.com>
---
arch/arm/mach-imx/mx6/soc.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index af31673..9c3c8dd 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -234,6 +234,10 @@ static int set_ldo_voltage(enum ldo_reg ldo, u32 mv)
u32 val, step, old, reg = readl(&anatop->reg_core);
u8 shift;
+ /* No LDO_SOC/PU/ARM */
+ if (is_mx6sll())
+ return 0;
+
if (mv < 725)
val = 0x00; /* Power gated off */
else if (mv > 1450)
@@ -293,7 +297,7 @@ static void clear_mmdc_ch_mask(void)
reg = readl(&mxc_ccm->ccdr);
/* Clear MMDC channel mask */
- if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl())
+ if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() ||
is_mx6sll())
reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
else
reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK |
MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
@@ -495,6 +499,10 @@ uint mmc_get_env_part(struct mmc *mmc)
int board_postclk_init(void)
{
+ /* NO LDO SOC on i.MX6SLL */
+ if (is_mx6sll())
+ return 0;
+
set_ldo_voltage(LDO_SOC, 1175); /* Set VDDSOC to 1.175V */
return 0;
@@ -576,7 +584,7 @@ void s_init(void)
u32 mask528;
u32 reg, periph1, periph2;
- if (is_mx6sx() || is_mx6ul() || is_mx6ull())
+ if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sll())
return;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
