From: Wenyou Yang <wenyou.y...@atmel.com> As said in READRE.kconfig, include/configs/*.h will be removed after all options are switched to Kconfig. As the first step, remove the follow line from include/configs/*.h.
#include <asm/hardware.h> Signed-off-by: Wenyou Yang <wenyou.y...@microchip.com> --- arch/arm/mach-at91/atmel_sfr.c | 1 + arch/arm/mach-at91/matrix.c | 1 + arch/arm/mach-at91/phy.c | 1 + drivers/pinctrl/pinctrl-at91.c | 1 + include/configs/at91-sama5_common.h | 2 -- include/configs/at91sam9m10g45ek.h | 4 +--- include/configs/at91sam9n12ek.h | 8 +------- include/configs/at91sam9x5ek.h | 2 -- include/configs/ma5d4evk.h | 9 ++++++--- include/configs/sama5d2_ptc.h | 8 ++++---- include/configs/sama5d2_xplained.h | 2 +- include/configs/sama5d3_xplained.h | 10 +++++----- include/configs/sama5d3xek.h | 8 ++++---- include/configs/sama5d4_xplained.h | 4 ++-- include/configs/sama5d4ek.h | 4 ++-- include/configs/vinco.h | 11 +++++++---- 16 files changed, 37 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-at91/atmel_sfr.c b/arch/arm/mach-at91/atmel_sfr.c index adf44c6a94..d595ba8836 100644 --- a/arch/arm/mach-at91/atmel_sfr.c +++ b/arch/arm/mach-at91/atmel_sfr.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <asm/hardware.h> #include <asm/io.h> #include <asm/arch/sama5_sfr.h> diff --git a/arch/arm/mach-at91/matrix.c b/arch/arm/mach-at91/matrix.c index 57d72700d3..08659c87d4 100644 --- a/arch/arm/mach-at91/matrix.c +++ b/arch/arm/mach-at91/matrix.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <asm/hardware.h> #include <asm/io.h> #include <asm/arch/sama5_matrix.h> diff --git a/arch/arm/mach-at91/phy.c b/arch/arm/mach-at91/phy.c index ddd70f5ff0..adb761e1ac 100644 --- a/arch/arm/mach-at91/phy.c +++ b/arch/arm/mach-at91/phy.c @@ -13,6 +13,7 @@ */ #include <common.h> +#include <asm/hardware.h> #include <asm/io.h> #include <linux/sizes.h> #include <asm/arch/at91_rstc.h> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 38c435e37a..81f30eabe9 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -10,6 +10,7 @@ #include <common.h> #include <dm.h> #include <dm/pinctrl.h> +#include <asm/hardware.h> #include <linux/io.h> #include <linux/err.h> #include <mach/at91_pio.h> diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index b4135235d4..6da9d8eb3e 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -10,8 +10,6 @@ #ifndef __AT91_SAMA5_COMMON_H #define __AT91_SAMA5_COMMON_H -#include <asm/hardware.h> - #define CONFIG_SYS_TEXT_BASE 0x26f00000 /* ARM asynchronous clock */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 8b00370cdd..dbdc70a960 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -11,8 +11,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - #define CONFIG_SYS_TEXT_BASE 0x73f00000 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ @@ -58,7 +56,7 @@ /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 +#define CONFIG_SYS_SDRAM_BASE 0x70000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 #define CONFIG_SYS_INIT_SP_ADDR \ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index e4ff019967..ba68138f21 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -10,12 +10,6 @@ #ifndef __AT91SAM9N12_CONFIG_H_ #define __AT91SAM9N12_CONFIG_H_ -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - #define CONFIG_SYS_TEXT_BASE 0x26f00000 /* ARM asynchronous clock */ @@ -60,7 +54,7 @@ * that address while providing maximum stack area below. */ # define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + (0x00300000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) /* DataFlash */ #ifdef CONFIG_CMD_SF diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 7887791c37..5f53bcc4d0 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -9,8 +9,6 @@ #ifndef __CONFIG_H__ #define __CONFIG_H__ -#include <asm/hardware.h> - #define CONFIG_SYS_TEXT_BASE 0x26f00000 /* ARM asynchronous clock */ diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index 7c28a94d92..542f96a0dc 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -15,11 +15,14 @@ #define CONFIG_SYS_USE_SERIALFLASH 1 #define CONFIG_BOARD_LATE_INIT +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c + /* * Memory configurations */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x10000000 #ifdef CONFIG_SPL_BUILD @@ -46,8 +49,8 @@ * Serial Driver */ #define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART0 -#define CONFIG_USART_ID ATMEL_ID_USART0 +#define CONFIG_USART_BASE 0xf802c000 +#define CONFIG_USART_ID 6 /* * Ethernet diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h index bff9f8eb48..4bd7c04e24 100644 --- a/include/configs/sama5d2_ptc.h +++ b/include/configs/sama5d2_ptc.h @@ -14,10 +14,10 @@ /* serial console */ #define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_UART0 -#define CONFIG_USART_ID ATMEL_ID_UART0 +#define CONFIG_USART_BASE 0xf801c000 +#define CONFIG_USART_ID 24 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #ifdef CONFIG_SPL_BUILD @@ -53,7 +53,7 @@ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_BASE 0x80000000 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index fdfc1d1bc0..b4d996d455 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -16,7 +16,7 @@ /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #ifdef CONFIG_SPL_BUILD diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 76533e3954..017c3862ad 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -16,16 +16,16 @@ * This needs to be defined for the OHCI code to work but it is defined as * ATMEL_ID_UHPHS in the CPU specific header files. */ -#define ATMEL_ID_UHP ATMEL_ID_UHPHS +#define ATMEL_ID_UHP 32 /* * Specify the clock enable bit in the PMC_SCER register. */ -#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP +#define ATMEL_PMC_UHP (1 << 6) /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x10000000 #ifdef CONFIG_SPL_BUILD @@ -41,7 +41,7 @@ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_BASE 0x60000000 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ @@ -65,7 +65,7 @@ #define CONFIG_USB_ATMEL_CLK_SEL_UPLL #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00600000 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "SAMA5D3 Xplained" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #endif diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 49cb237236..77b1e7ec2f 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -21,12 +21,12 @@ * This needs to be defined for the OHCI code to work but it is defined as * ATMEL_ID_UHPHS in the CPU specific header files. */ -#define ATMEL_ID_UHP ATMEL_ID_UHPHS +#define ATMEL_ID_UHP 32 /* * Specify the clock enable bit in the PMC_SCER register. */ -#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP +#define ATMEL_PMC_UHP (1 << 6) /* NOR flash */ #ifdef CONFIG_MTD_NOR_FLASH @@ -40,7 +40,7 @@ /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #ifdef CONFIG_SPL_BUILD @@ -62,7 +62,7 @@ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_BASE 0x60000000 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index ddb48c335a..36b2c01969 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -16,7 +16,7 @@ /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #ifdef CONFIG_SPL_BUILD @@ -38,7 +38,7 @@ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_BASE 0x80000000 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index ab0147738c..d9bca3db63 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -14,7 +14,7 @@ /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #ifdef CONFIG_SPL_BUILD @@ -36,7 +36,7 @@ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_BASE 0x80000000 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index adff1b6d7f..ad0a9fefba 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -23,12 +23,15 @@ /* serial console */ #define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3 +#define CONFIG_USART_BASE 0xfc00c000 +#define CONFIG_USART_ID 30 + +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x4000000 #define CONFIG_SYS_INIT_SP_ADDR \ @@ -55,7 +58,7 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_SUPPORT_EMMC_BOOT #define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 +#define ATMEL_BASE_MMCI 0xfc000000 #define CONFIG_SYS_MMC_CLK_OD 500000 /* For generating MMC partitions */ -- 2.13.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
