On 02/08/2017 15:56, Anatolij Gustschin wrote: > Select SION by appropriate macro instead of constant. > > Signed-off-by: Anatolij Gustschin <ag...@denx.de> > --- > arch/arm/include/asm/arch-mx6/mx6q_pins.h | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h > b/arch/arm/include/asm/arch-mx6/mx6q_pins.h > index a8456a2..41f7240 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h > +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h > @@ -863,7 +863,7 @@ MX6_PAD_DECL(SD3_DAT4__SD3_DATA4, 0x069C, 0x02B4, 0, > 0x0000, 0, 0) > MX6_PAD_DECL(SD3_DAT4__UART2_TX_DATA, 0x069C, 0x02B4, 1, 0x0000, 0, 0) > MX6_PAD_DECL(SD3_DAT4__UART2_RX_DATA, 0x069C, 0x02B4, 1, 0x0928, 5, 0) > MX6_PAD_DECL(SD3_DAT4__GPIO7_IO01, 0x069C, 0x02B4, 5, 0x0000, 0, 0) > -MX6_PAD_DECL(SD3_CMD__SD3_CMD, 0x06A0, 0x02B8, 16, 0x0000, 0, 0) > +MX6_PAD_DECL(SD3_CMD__SD3_CMD, 0x06A0, 0x02B8, 0 | > IOMUX_CONFIG_SION, 0x0000, 0, 0) > MX6_PAD_DECL(SD3_CMD__UART2_CTS_B, 0x06A0, 0x02B8, 1, 0x0000, 0, 0) > MX6_PAD_DECL(SD3_CMD__UART2_RTS_B, 0x06A0, 0x02B8, 1, 0x0924, 2, 0) > MX6_PAD_DECL(SD3_CMD__FLEXCAN1_TX, 0x06A0, 0x02B8, 2, 0x0000, 0, 0) > @@ -924,7 +924,7 @@ MX6_PAD_DECL(NANDF_CS3__ESAI_TX1, 0x06D8, 0x02F0, 2, > 0x0878, 1, 0) > MX6_PAD_DECL(NANDF_CS3__EIM_ADDR26, 0x06D8, 0x02F0, 3, 0x0000, 0, 0) > MX6_PAD_DECL(NANDF_CS3__GPIO6_IO16, 0x06D8, 0x02F0, 5, 0x0000, 0, 0) > MX6_PAD_DECL(NANDF_CS3__IPU2_SISG1, 0x06D8, 0x02F0, 6, 0x0000, 0, 0) > -MX6_PAD_DECL(SD4_CMD__SD4_CMD, 0x06DC, 0x02F4, 16, 0x0000, 0, 0) > +MX6_PAD_DECL(SD4_CMD__SD4_CMD, 0x06DC, 0x02F4, 0 | > IOMUX_CONFIG_SION, 0x0000, 0, 0) > MX6_PAD_DECL(SD4_CMD__NAND_RE_B, 0x06DC, 0x02F4, 1, 0x0000, 0, 0) > MX6_PAD_DECL(SD4_CMD__UART3_TX_DATA, 0x06DC, 0x02F4, 2, 0x0000, 0, 0) > MX6_PAD_DECL(SD4_CMD__UART3_RX_DATA, 0x06DC, 0x02F4, 2, 0x0930, 2, 0) > @@ -1001,7 +1001,7 @@ MX6_PAD_DECL(SD1_DAT3__PWM1_OUT, 0x072C, 0x0344, > 3, 0x0000, 0, 0) > MX6_PAD_DECL(SD1_DAT3__WDOG2_B, 0x072C, 0x0344, 4, 0x0000, 0, 0) > MX6_PAD_DECL(SD1_DAT3__GPIO1_IO21, 0x072C, 0x0344, 5, 0x0000, 0, 0) > MX6_PAD_DECL(SD1_DAT3__WDOG2_RESET_B_DEB, 0x072C, 0x0344, 6, 0x0000, 0, 0) > -MX6_PAD_DECL(SD1_CMD__SD1_CMD, 0x0730, 0x0348, 16, 0x0000, 0, 0) > +MX6_PAD_DECL(SD1_CMD__SD1_CMD, 0x0730, 0x0348, 0 | > IOMUX_CONFIG_SION, 0x0000, 0, 0) > MX6_PAD_DECL(SD1_CMD__ECSPI5_MOSI, 0x0730, 0x0348, 1, 0x0830, 0, 0) > MX6_PAD_DECL(SD1_CMD__PWM4_OUT, 0x0730, 0x0348, 2, 0x0000, 0, 0) > MX6_PAD_DECL(SD1_CMD__GPT_COMPARE1, 0x0730, 0x0348, 3, 0x0000, 0, 0) > @@ -1022,7 +1022,7 @@ MX6_PAD_DECL(SD2_CLK__ECSPI5_SCLK, 0x073C, 0x0354, > 1, 0x0828, 1, 0) > MX6_PAD_DECL(SD2_CLK__KEY_COL5, 0x073C, 0x0354, 2, 0x08E8, 3, 0) > MX6_PAD_DECL(SD2_CLK__AUD4_RXFS, 0x073C, 0x0354, 3, 0x07C0, 1, 0) > MX6_PAD_DECL(SD2_CLK__GPIO1_IO10, 0x073C, 0x0354, 5, 0x0000, 0, 0) > -MX6_PAD_DECL(SD2_CMD__SD2_CMD, 0x0740, 0x0358, 16, 0x0000, 0, 0) > +MX6_PAD_DECL(SD2_CMD__SD2_CMD, 0x0740, 0x0358, 0 | > IOMUX_CONFIG_SION, 0x0000, 0, 0) > MX6_PAD_DECL(SD2_CMD__ECSPI5_MOSI, 0x0740, 0x0358, 1, 0x0830, 1, 0) > MX6_PAD_DECL(SD2_CMD__KEY_ROW5, 0x0740, 0x0358, 2, 0x08F4, 2, 0) > MX6_PAD_DECL(SD2_CMD__AUD4_RXC, 0x0740, 0x0358, 3, 0x07BC, 1, 0) >
Reviewed-by: Stefano Babic <sba...@denx.de> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
