Change these board to use a live device tree after relocation. Signed-off-by: Simon Glass <s...@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> Tested-on: Beaver, Jetson-TK1 ---
Changes in v5: None Changes in v4: - Rebase to master - Drop changes already applied - Fix PCI and i2c init problems on jetson-tx1 - Enable livetree for jetson-tk1 also Changes in v3: - Enable livetree for jetson-tk1 also Changes in v2: - Enable livetree for beaver also - Add timing information configs/beaver_defconfig | 1 + configs/jetson-tk1_defconfig | 1 + configs/nyan-big_defconfig | 1 + configs/p2371-2180_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 71d6cd52c1..10fd50d925 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -25,6 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_LIVE=y CONFIG_SPL_DM=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index d086951299..a533c6402f 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -25,6 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_LIVE=y CONFIG_SPL_DM=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index 8e11c2f15c..f62ebac04d 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -37,6 +37,7 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_LIVE=y CONFIG_SPL_DM=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index d04f052355..4345fb070a 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -22,6 +22,7 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_LIVE=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_DFU_SF=y -- 2.14.0.rc0.284.gd933b75aa4-goog _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
