On 07/21/2017 08:43 PM, Rob Clark wrote:
> Normally a EFI application, like grub2, is going to expect to see
%s/a/an/
> block-io devices for both the actual disk and for each partition
> (with the disk object being parent of the partition objects).
>
> Now instead of seeing devices like:
>
> /File(sd...@07864000.blk)/EndEntire
> /File(usb_mass_storage.lun0)/EndEntire
>
> You see:
>
> /ACPI(133741d0,0)/UnknownMessaging(1d)/EndEntire
>
> /ACPI(133741d0,0)/UnknownMessaging(1d)/HD(0,800,64000,0000000000000000,1,0)/EndEntire
>
> /ACPI(133741d0,0)/UnknownMessaging(1d)/HD(1,64800,200000,0000000000000000,1,0)/EndEntire
>
> /ACPI(133741d0,0)/UnknownMessaging(1d)/HD(2,264800,19a000,0000000000000000,1,0)/EndEntire
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/EndEntire
>
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(0,800,60000,0000000000000000,1,0)/EndEntire
>
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(1,61000,155000,0000000000000000,1,0)/EndEntire
>
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(2,20fa800,1bbf8800,0000000000000000,1,0)/EndEntire
>
> /ACPI(133741d0,0)/USB(0,0)/USB(0,0)/USB(0,0)/HD(3,1b6800,1f44000,0000000000000000,1,0)/EndEntire
>
> This is on a board with single USB disk and single sd-card. The
> UnknownMessaging(1d) node in the device-path is the MMC device,
> but grub_efi_print_device_path() hasn't been updated yet for some
> of the newer device-path sub-types.
>
> This patch is somewhat based on a patch originally from Peter Jones,
> but re-worked to use efi_devpath, so it doesn't much resemble the
> original.
>
> This depends on efi_devpath, which depends on CONFIG_DM, so legacy
> devices will still get the old broken behavior.
>
> There are a couple TODOs:
> 1) how to find slot # for mmc device
> 2) how to find parent port # and interface # for usb device
>
> Also I don't seem to manage to get u-boot to recognize my usb-eth
> dongle (config issue?) so I haven't been able to test the net-boot
> path.. so it likely needs some work.
>
> Cc: Peter Jones <pjo...@redhat.com>
> Signed-off-by: Rob Clark <robdcl...@gmail.com>
> ---
> lib/efi_loader/efi_disk.c | 73
> ++++++++++++++++++++++++++++++++++-------------
> 1 file changed, 53 insertions(+), 20 deletions(-)
>
> diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
> index 09697936b5..44f72c93e2 100644
> --- a/lib/efi_loader/efi_disk.c
> +++ b/lib/efi_loader/efi_disk.c
> @@ -28,7 +28,7 @@ struct efi_disk_obj {
> /* EFI Interface Media descriptor struct, referenced by ops */
> struct efi_block_io_media media;
> /* EFI device path to this block device */
> - struct efi_device_path_file_path *dp;
> + struct efi_device_path *dp;
> /* Offset into disk for simple partitions */
> lbaint_t offset;
> /* Internal block device */
> @@ -193,21 +193,47 @@ static const struct efi_block_io block_io_disk_template
> = {
> .flush_blocks = &efi_disk_flush_blocks,
> };
>
> +static struct efi_device_path *blk2dp(struct blk_desc *desc,
> + const char *name, unsigned part)
> +{
> +#ifdef CONFIG_DM
> + /* part==0 is the case for parent block device representing
> + * entire disk, and part>=1 is for child per-partition
> + * MEDIA_DEVICE objects:
> + */
> + if (part == 0)
> + return efi_dp_from_dev(desc->bdev->parent);
> + return efi_dp_from_part(desc, part);
> +#else
> + struct efi_device_path_file_path *dp = calloc(2, sizeof(*dp));
> +
> + dp[0].dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
> + dp[0].dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH;
> + dp[0].dp.length = sizeof(*dp);
> + ascii2unicode(dp[0].str, name);
> +
> + dp[1].dp.type = DEVICE_PATH_TYPE_END;
> + dp[1].dp.sub_type = DEVICE_PATH_SUB_TYPE_END;
> + dp[1].dp.length = sizeof(*dp);
> +
> + return dp;
> +#endif
> +}
> +
> static void efi_disk_add_dev(const char *name,
> const char *if_typename,
> - const struct blk_desc *desc,
> + struct blk_desc *desc,
> int dev_index,
> - lbaint_t offset)
> + lbaint_t offset,
> + unsigned part)
> {
> struct efi_disk_obj *diskobj;
> - struct efi_device_path_file_path *dp;
> - int objlen = sizeof(*diskobj) + (sizeof(*dp) * 2);
>
> /* Don't add empty devices */
> if (!desc->lba)
> return;
>
> - diskobj = calloc(1, objlen);
> + diskobj = calloc(1, sizeof(*diskobj));
>
> /* Fill in object data */
> diskobj->parent.protocols[0].guid = &efi_block_io_guid;
I am unable to apply this patch to the efi-next branch of
git://github.com/agraf/u-boot.git
Applying: efi_loader: make disk objects for partitions
error: patch failed: lib/efi_loader/efi_disk.c:193
error: lib/efi_loader/efi_disk.c: patch does not apply
Patch failed at 0001 efi_loader: make disk objects for partitions
Could you, please, resubmit your patch series rebased on efi-next.
You somehow forgot to CC the maintainer Alexander Graf in your patch.
Please, always use scripts/get_maintainer.pl to determine whom a patch
should be addressed to.
Best regards
Heinrich Schuchardt
> @@ -228,18 +254,7 @@ static void efi_disk_add_dev(const char *name,
> diskobj->media.io_align = desc->blksz;
> diskobj->media.last_block = desc->lba - offset;
> diskobj->ops.media = &diskobj->media;
> -
> - /* Fill in device path */
> - dp = (void*)&diskobj[1];
> - diskobj->dp = dp;
> - dp[0].dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE;
> - dp[0].dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH;
> - dp[0].dp.length = sizeof(*dp);
> - ascii2unicode(dp[0].str, name);
> -
> - dp[1].dp.type = DEVICE_PATH_TYPE_END;
> - dp[1].dp.sub_type = DEVICE_PATH_SUB_TYPE_END;
> - dp[1].dp.length = sizeof(*dp);
> + diskobj->dp = blk2dp(desc, name, part);
>
> /* Hook up to the device list */
> list_add_tail(&diskobj->parent.link, &efi_obj_list);
> @@ -259,11 +274,16 @@ static int efi_disk_create_eltorito(struct blk_desc
> *desc,
> if (desc->part_type != PART_TYPE_ISO)
> return 0;
>
> +#ifdef CONFIG_DM
> + /* add block device: */
> + efi_disk_add_dev(devname, if_typename, desc, diskid, 0, 0);
> +#endif
> + /* ... and devices for each partition: */
> while (!part_get_info(desc, part, &info)) {
> snprintf(devname, sizeof(devname), "%s:%d", pdevname,
> part);
> efi_disk_add_dev(devname, if_typename, desc, diskid,
> - info.start);
> + info.start, part);
> part++;
> disks++;
> }
> @@ -290,9 +310,22 @@ int efi_disk_register(void)
> uclass_next_device(&dev)) {
> struct blk_desc *desc = dev_get_uclass_platdata(dev);
> const char *if_typename = dev->driver->name;
> + disk_partition_t info;
> + int part = 1;
>
> printf("Scanning disk %s...\n", dev->name);
> - efi_disk_add_dev(dev->name, if_typename, desc, desc->devnum, 0);
> +
> +#ifdef CONFIG_DM
> + /* add block device: */
> + efi_disk_add_dev(dev->name, if_typename, desc,
> + desc->devnum, 0, 0);
> +#endif
> + /* ... and devices for each partition: */
> + while (!part_get_info(desc, part, &info)) {
> + efi_disk_add_dev(dev->name, if_typename, desc,
> + desc->devnum, 0, part);
> + part++;
> + }
> disks++;
>
> /*
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
