Hi Simon, On Sat, Jul 22, 2017 at 7:11 AM, Simon Glass <s...@chromium.org> wrote: > This converts the following to Kconfig: > CONFIG_CMD_SH_ZIMAGEBOOT > > Signed-off-by: Simon Glass <s...@chromium.org> > --- > > arch/sh/Kconfig | 2 ++ > arch/sh/lib/Kconfig | 5 +++++ > configs/r2dplus_defconfig | 1 + > configs/sh7785lcr_32bit_defconfig | 1 + > configs/sh7785lcr_defconfig | 1 + > include/configs/r2dplus.h | 1 - > include/configs/sh7785lcr.h | 2 -- > scripts/config_whitelist.txt | 1 - > 8 files changed, 10 insertions(+), 4 deletions(-) > create mode 100644 arch/sh/lib/Kconfig > > diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig > index 6ac22af2f1..d20761e66c 100644 > --- a/arch/sh/Kconfig > +++ b/arch/sh/Kconfig > @@ -125,6 +125,8 @@ config SYS_CPU > default "sh3" if CPU_SH3 > default "sh4" if CPU_SH4 > > +source "arch/sh/lib/Kconfig" > + > source "board/alphaproject/ap_sh4a_4a/Kconfig" > source "board/espt/Kconfig" > source "board/mpr2/Kconfig" > diff --git a/arch/sh/lib/Kconfig b/arch/sh/lib/Kconfig > new file mode 100644 > index 0000000000..5142cb1af2 > --- /dev/null > +++ b/arch/sh/lib/Kconfig > @@ -0,0 +1,5 @@ > +config CMD_SH_ZIMAGEBOOT > + bool "Boot a zImage on SH"
Shouldn't it be: "zimageboot - Boot a zImage on SH" And I think this should be "default y" otherwise it's not useful. This eliminates the need to update SH boards defconfig files. > + help > + This is special SH-specific command to boot a zImage (compressed > + Linux image) on SH-architecture boards. [snip] Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
