Hi Simon, On Sat, Jul 22, 2017 at 7:11 AM, Simon Glass <s...@chromium.org> wrote: > This converts the following to Kconfig: > CONFIG_CMD_SAVES > > Signed-off-by: Simon Glass <s...@chromium.org> > --- > > README | 1 - > arch/arm/Kconfig | 6 ++++++ > cmd/Kconfig | 6 ++++++ > configs/ethernut5_defconfig | 1 + > configs/microblaze-generic_defconfig | 1 + > configs/x600_defconfig | 1 + > configs/xtfpga_defconfig | 1 + > include/config_cmd_all.h | 1 - > include/configs/calimain.h | 1 - > include/configs/da850evm.h | 1 - > include/configs/ea20.h | 1 - > include/configs/ethernut5.h | 1 - > include/configs/ipam390.h | 1 - > include/configs/legoev3.h | 1 - > include/configs/microblaze-generic.h | 8 -------- > include/configs/omapl138_lcdk.h | 1 - > include/configs/spear-common.h | 1 - > include/configs/ti_armv7_keystone2.h | 1 - > include/configs/x600.h | 1 - > include/configs/xtfpga.h | 2 -- > scripts/config_whitelist.txt | 1 - > 21 files changed, 16 insertions(+), 23 deletions(-) > > diff --git a/README b/README > index cb954098e4..ce179b828e 100644 > --- a/README > +++ b/README > @@ -816,7 +816,6 @@ The following options need to be configured: > CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network > host > CONFIG_CMD_RUN run command in env variable > - CONFIG_CMD_SAVES * save S record dump > CONFIG_CMD_SDRAM * print SDRAM configuration > information > (requires CONFIG_CMD_I2C) > CONFIG_CMD_SF * Read/write/erase SPI NOR flash > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 6ab79a7a7a..c3c389298d 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -308,6 +308,7 @@ config TARGET_GPLUGD > config ARCH_DAVINCI > bool "TI DaVinci" > select CPU_ARM926EJS > + imply CMD_SAVES > help > Support for TI's DaVinci platform. > > @@ -409,21 +410,25 @@ config TARGET_SPEAR300 > bool "Support spear300" > select CPU_ARM926EJS > select BOARD_EARLY_INIT_F > + imply CMD_SAVES > > config TARGET_SPEAR310 > bool "Support spear310" > select CPU_ARM926EJS > select BOARD_EARLY_INIT_F > + imply CMD_SAVES > > config TARGET_SPEAR320 > bool "Support spear320" > select CPU_ARM926EJS > select BOARD_EARLY_INIT_F > + imply CMD_SAVES > > config TARGET_SPEAR600 > bool "Support spear600" > select CPU_ARM926EJS > select BOARD_EARLY_INIT_F > + imply CMD_SAVES > > config TARGET_STV0991 > bool "Support stv0991" > @@ -571,6 +576,7 @@ config ARCH_KEYSTONE > select CMD_POWEROFF > imply FIT > imply CMD_MTDPARTS > + imply CMD_SAVES > > config ARCH_OMAP2PLUS > bool "TI OMAP2+" > diff --git a/cmd/Kconfig b/cmd/Kconfig > index aac79f4bcf..4be801cdfe 100644 > --- a/cmd/Kconfig > +++ b/cmd/Kconfig > @@ -798,6 +798,12 @@ config CMD_REGINFO > help > Provides access to low-level register information. > > +config CMD_SAVES > + bool "saves - Save a file over serial in S-Record format" > + help > + Provides a way to save a binary file using the Motorola S-Record > + format over the serial line. > + > endmenu > > > diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig > index 197052dba6..20bff59cac 100644 > --- a/configs/ethernut5_defconfig > +++ b/configs/ethernut5_defconfig > @@ -16,6 +16,7 @@ CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > CONFIG_CMD_USB=y > # CONFIG_CMD_FPGA is not set > +CONFIG_CMD_SAVES=y > CONFIG_CMD_RARP=y > CONFIG_CMD_DHCP=y > CONFIG_CMD_MII=y > diff --git a/configs/microblaze-generic_defconfig > b/configs/microblaze-generic_defconfig > index f79907ba14..471be29ee5 100644 > --- a/configs/microblaze-generic_defconfig > +++ b/configs/microblaze-generic_defconfig > @@ -24,6 +24,7 @@ CONFIG_SYS_PROMPT="U-Boot-mONStR> " > CONFIG_CMD_ASKENV=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_MFSL=y > +CONFIG_CMD_SAVES=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TFTPPUT=y > CONFIG_CMD_DHCP=y > diff --git a/configs/x600_defconfig b/configs/x600_defconfig > index 2e5d5f1ae8..f10d81116a 100644 > --- a/configs/x600_defconfig > +++ b/configs/x600_defconfig > @@ -22,6 +22,7 @@ CONFIG_CMD_I2C=y > CONFIG_CMD_USB=y > CONFIG_CMD_FPGA_LOADMK=y > CONFIG_CMD_GPIO=y > +CONFIG_CMD_SAVES=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_DHCP=y > CONFIG_CMD_MII=y > diff --git a/configs/xtfpga_defconfig b/configs/xtfpga_defconfig > index 9f85d63965..0fc7141257 100644 > --- a/configs/xtfpga_defconfig > +++ b/configs/xtfpga_defconfig > @@ -9,6 +9,7 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press > <SPACE> to stop\n" > CONFIG_AUTOBOOT_STOP_STR=" " > CONFIG_CMD_ASKENV=y > CONFIG_CRC32_VERIFY=y > +CONFIG_CMD_SAVES=y > CONFIG_CMD_DHCP=y > CONFIG_CMD_PING=y > CONFIG_CMD_DIAG=y > diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h > index 26c08eeef6..6ad3f17169 100644 > --- a/include/config_cmd_all.h > +++ b/include/config_cmd_all.h > @@ -14,7 +14,6 @@ > */ > > #define CONFIG_CMD_NAND /* NAND support */ > -#define CONFIG_CMD_SAVES /* save S record dump */ > #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ > #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ > #define CONFIG_CMD_UBIFS /* UBIFS Support */ > diff --git a/include/configs/calimain.h b/include/configs/calimain.h > index d43e3314a7..e0fe981b43 100644 > --- a/include/configs/calimain.h > +++ b/include/configs/calimain.h > @@ -298,7 +298,6 @@ > /* > * U-Boot commands > */
The above comments should be removed. > -#define CONFIG_CMD_SAVES > > #ifndef CONFIG_DRIVER_TI_EMAC > #endif > diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h > index 1bb38651d2..689f68c869 100644 > --- a/include/configs/da850evm.h > +++ b/include/configs/da850evm.h > @@ -272,7 +272,6 @@ > /* > * U-Boot commands > */ ditto. > -#define CONFIG_CMD_SAVES > > #ifdef CONFIG_CMD_BDI > #define CONFIG_CLOCKS > diff --git a/include/configs/ea20.h b/include/configs/ea20.h > index 0b8464c044..38cf11076d 100644 > --- a/include/configs/ea20.h > +++ b/include/configs/ea20.h > @@ -127,7 +127,6 @@ > /* > * U-Boot commands > */ ditto. > -#define CONFIG_CMD_SAVES > > #ifdef CONFIG_CMD_BDI > #define CONFIG_CLOCKS > diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h > index 8b9aaaa2c4..4ad114e8ba 100644 > --- a/include/configs/ethernut5.h > +++ b/include/configs/ethernut5.h > @@ -87,7 +87,6 @@ > #define CONFIG_CMD_NAND > > #ifndef MINIMAL_LOADER > -#define CONFIG_CMD_SAVES > #define CONFIG_CMD_UBIFS > #endif > > diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h > index b2b969ade2..95cd769843 100644 > --- a/include/configs/ipam390.h > +++ b/include/configs/ipam390.h > @@ -240,7 +240,6 @@ > /* > * U-Boot commands > */ ditto. > -#define CONFIG_CMD_SAVES > > #ifdef CONFIG_CMD_BDI > #define CONFIG_CLOCKS > diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h > index 15da4074f2..34c65f3920 100644 > --- a/include/configs/legoev3.h > +++ b/include/configs/legoev3.h > @@ -200,7 +200,6 @@ > /* > * U-Boot commands > */ ditto. > -#define CONFIG_CMD_SAVES > > #ifdef CONFIG_CMD_BDI > #define CONFIG_CLOCKS > diff --git a/include/configs/microblaze-generic.h > b/include/configs/microblaze-generic.h > index 84b4154ec5..5a1875ad15 100644 > --- a/include/configs/microblaze-generic.h > +++ b/include/configs/microblaze-generic.h > @@ -172,16 +172,8 @@ > #if defined(FLASH) > # undef CONFIG_CMD_UBIFS > > -# if !defined(RAMENV) > -# define CONFIG_CMD_SAVES > -# endif > - > #else > #if defined(SPIFLASH) > - > -# if !defined(RAMENV) > -# define CONFIG_CMD_SAVES > -# endif > #else > # undef CONFIG_CMD_UBIFS > #endif > diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h > index dee0ae0d9a..168da4ab95 100644 > --- a/include/configs/omapl138_lcdk.h > +++ b/include/configs/omapl138_lcdk.h > @@ -283,7 +283,6 @@ > /* > * U-Boot commands > */ ditto. > -#define CONFIG_CMD_SAVES > #ifdef CONFIG_CMD_BDI > #define CONFIG_CLOCKS > #endif > diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h > index 86e14ffac8..d69e116085 100644 > --- a/include/configs/spear-common.h > +++ b/include/configs/spear-common.h > @@ -97,7 +97,6 @@ > * Command support defines > */ > #define CONFIG_CMD_NAND > -#define CONFIG_CMD_SAVES > > /* > * Default Environment Varible definitions > diff --git a/include/configs/ti_armv7_keystone2.h > b/include/configs/ti_armv7_keystone2.h > index ac8dabd9ca..b76d20c969 100644 > --- a/include/configs/ti_armv7_keystone2.h > +++ b/include/configs/ti_armv7_keystone2.h > @@ -202,7 +202,6 @@ > #define CONFIG_USB_PHY_CFG_BASE KS2_USB_PHY_CFG_BASE > > /* U-Boot command configuration */ > -#define CONFIG_CMD_SAVES > #define CONFIG_CMD_UBIFS > > /* U-Boot general configuration */ > diff --git a/include/configs/x600.h b/include/configs/x600.h > index 3ff6b70bde..c5fd973147 100644 > --- a/include/configs/x600.h > +++ b/include/configs/x600.h > @@ -107,7 +107,6 @@ > * Command support defines > */ > #define CONFIG_CMD_NAND > -#define CONFIG_CMD_SAVES > #define CONFIG_CMD_UBIFS > #define CONFIG_LZO > > diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h > index 7d7d9bb983..44120db963 100644 > --- a/include/configs/xtfpga.h > +++ b/include/configs/xtfpga.h > @@ -127,8 +127,6 @@ > /* U-Boot commands */ > /*=================*/ > ditto. > -#define CONFIG_CMD_SAVES > - > /*==============================*/ > /* U-Boot autoboot configuration */ > /*==============================*/ > diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt > index 221525b78a..a0b39a355f 100644 > --- a/scripts/config_whitelist.txt > +++ b/scripts/config_whitelist.txt > @@ -296,7 +296,6 @@ CONFIG_CM922T_XA10 > CONFIG_CMDLINE_EDITING > CONFIG_CMDLINE_PS_SUPPORT > CONFIG_CMDLINE_TAG > -CONFIG_CMD_SAVES > CONFIG_CMD_SCSI > CONFIG_CMD_SDRAM > CONFIG_CMD_SF_TEST > -- Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
