This converts the following to Kconfig:
CONFIG_CMD_PCMCIA
Signed-off-by: Simon Glass <s...@chromium.org>
---
README | 1 -
cmd/Kconfig | 8 ++++++++
configs/ms7720se_defconfig | 1 +
include/config_cmd_all.h | 1 -
include/configs/dbau1x00.h | 5 -----
include/configs/ms7720se.h | 1 -
scripts/config_whitelist.txt | 1 -
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/README b/README
index fe63a7090b..e05be8d9a7 100644
--- a/README
+++ b/README
@@ -813,7 +813,6 @@ The following options need to be configured:
CONFIG_CMD_NAND * NAND support
CONFIG_CMD_NET bootp, tftpboot, rarpboot
CONFIG_CMD_NFS NFS support
- CONFIG_CMD_PCMCIA * PCMCIA support
CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
host
CONFIG_CMD_PORTIO * Port I/O
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 007895c4ce..c9fb24d984 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -779,6 +779,14 @@ config CMD_PCI
peripherals. Sub-commands allow bus enumeration, displaying and
changing configuration space and a few other features.
+config CMD_PCMCIA
+ bool "pinit - Set up PCMCIA device"
+ help
+ Provides a means to initialise a PCMCIA (Personal Computer Memory Card
+ International Association) device. This is an old standard from about
+ 1990. These devices are typically removable memory or network cards
using
+ a standard 68-pin connector.
+
endmenu
diff --git a/configs/ms7720se_defconfig b/configs/ms7720se_defconfig
index 30e52692d0..e1d8588233 100644
--- a/configs/ms7720se_defconfig
+++ b/configs/ms7720se_defconfig
@@ -15,6 +15,7 @@ CONFIG_CMD_IDE=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_PCMCIA=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index 2225cf7a6b..ea9860cf91 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -14,7 +14,6 @@
*/
#define CONFIG_CMD_NAND /* NAND support */
-#define CONFIG_CMD_PCMCIA /* PCMCIA support */
#define CONFIG_CMD_PORTIO /* Port I/O */
#define CONFIG_CMD_REGINFO /* Register dump */
#define CONFIG_CMD_REISER /* Reiserfs support */
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 9db3380a95..782e0cbfda 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -67,11 +67,6 @@
* Command line configuration.
*/
-#ifdef CONFIG_DBAU1550
-
-#undef CONFIG_CMD_PCMCIA
-#endif
-
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index 2855c00723..158b73ce50 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -13,7 +13,6 @@
#define CONFIG_MS7720SE 1
#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_PCMCIA
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_BOOTFILE "/boot/zImage"
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 0eba95d4a1..6662b60754 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -296,7 +296,6 @@ CONFIG_CM922T_XA10
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
-CONFIG_CMD_PCMCIA
CONFIG_CMD_PORTIO
CONFIG_CMD_READ
CONFIG_CMD_REGINFO
--
2.14.0.rc0.284.gd933b75aa4-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
