On Tue, Jul 18, 2017 at 8:10 PM, Stefan Roese <s...@denx.de> wrote: > Change from EHCI to xHCI on the DFI BayTrail SoM. > > The xHCI USB hub is connected to an GPIO on the DFI BayTrail SoM. For > correct operation, it needs to get reset upon power-up. Otherwise it > may happen that the hub is not detected after a software reboot. This > patch also configures this GPIO in the dts for correct operation. > > Signed-off-by: Stefan Roese <s...@denx.de> > Cc: Simon Glass <s...@chromium.org> > Reviewed-by: Bin Meng <bmeng...@gmail.com> > --- > v2: > - Squashed 2 patches into one as suggested by Bin > - Added Bin's reviewed-by > > arch/x86/dts/dfi-bt700.dtsi | 12 ++++++++++++ > board/dfi/dfi-bt700/Kconfig | 1 + > board/dfi/dfi-bt700/dfi-bt700.c | 27 +++++++++++++++++++++++++++ > 3 files changed, 40 insertions(+) >
applied to u-boot-x86, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
