As there is no board that currently uses xhci-pci driver without DM
USB, drop its support and leave only DM support.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
drivers/usb/host/xhci-pci.c | 52 ---------------------------------------------
1 file changed, 52 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 63daaa6..5ad8452 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -14,56 +14,6 @@
#include "xhci.h"
-#ifndef CONFIG_DM_USB
-
-/*
- * Create the appropriate control structures to manage a new XHCI host
- * controller.
- */
-int xhci_hcd_init(int index, struct xhci_hccr **ret_hccr,
- struct xhci_hcor **ret_hcor)
-{
- struct xhci_hccr *hccr;
- struct xhci_hcor *hcor;
- pci_dev_t pdev;
- uint32_t cmd;
- int len;
-
- pdev = pci_find_class(PCI_CLASS_SERIAL_USB_XHCI, index);
- if (pdev < 0) {
- printf("XHCI host controller not found\n");
- return -1;
- }
-
- hccr = (struct xhci_hccr *)pci_map_bar(pdev,
- PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
- len = HC_LENGTH(xhci_readl(&hccr->cr_capbase));
- hcor = (struct xhci_hcor *)((uint32_t)hccr + len);
-
- debug("XHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
- (uint32_t)hccr, (uint32_t)hcor, len);
-
- *ret_hccr = hccr;
- *ret_hcor = hcor;
-
- /* enable busmaster */
- pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER;
- pci_write_config_dword(pdev, PCI_COMMAND, cmd);
-
- return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding * to the XHCI host
- * controller
- */
-void xhci_hcd_stop(int index)
-{
-}
-
-#else
-
struct xhci_pci_priv {
struct xhci_ctrl ctrl; /* Needs to come first in this struct! */
};
@@ -137,5 +87,3 @@ static struct pci_device_id xhci_pci_supported[] = {
};
U_BOOT_PCI_DEVICE(xhci_pci, xhci_pci_supported);
-
-#endif /* CONFIG_DM_USB */
--
2.9.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
