On Tue, Jun 13, 2017 at 10:07:10AM +0530, 'Vignesh R' via BeagleBoard GSoC wrote: > > > On Monday 12 June 2017 10:12 PM, Jason Kridner wrote: > > > I see you submitted this defconfig: > > https://lists.denx.de/pipermail/u-boot/2016-November/272425.html > > > > I have a Google Summer of Code student intern attempting to use it and he's > > seeing it hang without entering UMS mode. Details are below. > > > > Can you give any advice on how you tested this? > > Could you try this patch that I posted sometime back: > https://patchwork.ozlabs.org/patch/748877/ >
Were you able to get this to compile and fit in the SRAM? With the latest U-Boot and your patch I get the following on compile: arm-poky-linux-gnueabi-ld.bfd: u-boot-spl section `.rodata' will not fit in region `.sram' arm-poky-linux-gnueabi-ld.bfd: region `.sram' overflowed by 9928 bytes scripts/Makefile.spl:333: recipe for target 'spl/u-boot-spl' failed make[1]: *** [spl/u-boot-spl] Error 1 Makefile:1382: recipe for target 'spl/u-boot-spl' failed make: *** [spl/u-boot-spl] Error 2 I had to remove some of the other features to get it to fit in SRAM. Here is the patch that I sent yesterday: https://patchwork.ozlabs.org/patch/774899/ > I forgot to follow that up and looks like it did not make into the > u-boot master branch. > > Regards > Vignesh > > > > > I believe he still needs to do something to explicitly enable UMS. Can you > > confirm? > > > > Ravi, > > > > If Stefan cannot answer, I'd suggest adjusting the default boot command to > > invoke UMS. Have you been able to stop the boot process using the serial > > port and get to the u-boot console? At the console, have you tried running > > the 'ums' command? > > > > Regards, > > Jason > > > > On Sun, Jun 11, 2017 at 4:18 PM Ravi Kumar Prasad <7rav...@gmail.com> wrote: > > > >> Hi, > >> I'm porting BBBlfs bootloader server to nodejs. Now, after receiving tftp > >> request for SPL, I'm transferring SPL. > >> I built spl/uboot with config am335x_evm_usbspl_defconfig . After SPL > >> transfer it fails to boot, here's the serial output: > >> > >> U-Boot SPL 2017.07-rc1-00163-g8cb3ce6 (Jun 11 2017 - 01:09:02) > >> SPL: failed to boot from all boot devices > >> ### ERROR ### Please RESET the board ### > >> > >> Please help me to debug this problem. > >> Code for server: https://github.com/ravikp7/node-beagle-boot > >> Thanks > >> Ravi > >> > >> -- > >> You received this message because you are subscribed to the Google Groups > >> "BeagleBoard GSoC" group. > >> To unsubscribe from this group and stop receiving emails from it, send an > >> email to beagleboard-gsoc+unsubscr...@googlegroups.com. > >> For more options, visit https://groups.google.com/d/optout. > >> > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > https://lists.denx.de/listinfo/u-boot > > > > -- > Regards > Vignesh > > -- > You received this message because you are subscribed to the Google Groups > "BeagleBoard GSoC" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard-gsoc+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
