On Mon, Jun 12, 2017 at 10:42:40AM -0700, Ravi Kumar Prasad wrote: > > > On Monday, June 12, 2017 at 10:13:08 PM UTC+5:30, Jason Kridner wrote: > > > > Stefan, > > > > I see you submitted this defconfig: > > https://lists.denx.de/pipermail/u-boot/2016-November/272425.html > > > > I have a Google Summer of Code student intern attempting to use it and > > he's seeing it hang without entering UMS mode. Details are below. > > > > Can you give any advice on how you tested this? > > > > I believe he still needs to do something to explicitly enable UMS. Can you > > confirm? > > > > Ravi, > > > > If Stefan cannot answer, I'd suggest adjusting the default boot command to > > invoke UMS. > > > But SPL isn't booting first :(
It was a configuration issue. I sent a patch to the U-Boot mailinglist. Should see it after it approved by the moderator. > > > Have you been able to stop the boot process using the serial port and get > > to the u-boot console? At the console, have you tried running the 'ums' > > command? > > > Yes, I tried running ums command from console, => ums 0 mmc 1 and the emmc > was mounted as mass storage device. > The problem was earlier in the boot than this. > > > > Regards, > > Jason > > > > On Sun, Jun 11, 2017 at 4:18 PM Ravi Kumar Prasad <7ra...@gmail.com > > <javascript:>> wrote: > > > >> Hi, > >> I'm porting BBBlfs bootloader server to nodejs. Now, after receiving tftp > >> request for SPL, I'm transferring SPL. > >> I built spl/uboot with config am335x_evm_usbspl_defconfig . After SPL > >> transfer it fails to boot, here's the serial output: > >> > >> U-Boot SPL 2017.07-rc1-00163-g8cb3ce6 (Jun 11 2017 - 01:09:02) > >> SPL: failed to boot from all boot devices > >> ### ERROR ### Please RESET the board ### Here is a pastebin after the configuration changes were applied: https://pastebin.com/MbKfB7bF He should be back in business. > >> > >> Please help me to debug this problem. > >> Code for server: https://github.com/ravikp7/node-beagle-boot > >> Thanks > >> Ravi > >> > >> -- > >> You received this message because you are subscribed to the Google Groups > >> "BeagleBoard GSoC" group. > >> To unsubscribe from this group and stop receiving emails from it, send an > >> email to beagleboard-gs...@googlegroups.com <javascript:>. > >> For more options, visit https://groups.google.com/d/optout. > >> > > > > -- > You received this message because you are subscribed to the Google Groups > "BeagleBoard GSoC" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard-gsoc+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
