> > > Hi, > > > > > > I was trying to build u-boot for omap3_3430sdp and > > > omap3_zoom2, and the build fails with the error below. > > > > > > I'm on commit f2b4bc0 from the master branch. I'm > > > using CodeSourcery's 2008q3 toolchain. > > > The commands I ran were: > > > > > > make CROSS_COMPILE=arm-none-linux-gnueabi- > > > omap3_3430sdp_config; make CROSS_COMPILE=arm-none-linux-gnueabi- > > > > > > Any ideas what I'm doing wrong? > > > > > > make -C examples/standalone all > > > make[1]: Entering directory > > > `/data/git/denx-uboot/u-boot/examples/standalone' > > > arm-none-linux-gnueabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float > > > -D__KERNEL__ -DTEXT_BASE=0x80e80000 > > > -I/data/git/denx-uboot/u-boot/include -fno-builtin -ffreestanding > > > -nostdinc -isystem > > > /data/arm-2008q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/include > > > -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux > > > -mno-thumb-interwork -march=armv5 -Wall -Wstrict-prototypes > > > -fno-stack-protector -g -Os -fno-common -ffixed-r8 -msoft-float > > > -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/data/git/denx-uboot/u-boot/include > > > -fno-builtin -ffreestanding -nostdinc -isystem > > > /data/arm-2008q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/include > > > -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux > > > -mno-thumb-interwork -march=armv5 -I.. -Bstatic -T u-boot.lds -Ttext > > > 0x80e80000 -o .c > > > arm-none-linux-gnueabi-gcc: no input files > > > make[1]: *** [.c] Error 1 > > > make[1]: Leaving directory > > `/data/git/denx-uboot/u-boot/examples/standalone' > > > make: *** [examples/standalone] Error 2 > > > > > > I took a look at examples/standalone/Makefile: > > > > The patch below gets things going again. So looks like something > > clobbered $(ELF-y). Any ideas what it could be? > > > > Thanks in advance, > > Anand > > > > diff --git a/examples/standalone/Makefile > > b/examples/standalone/Makefile > > index 5e2f2bc..73b19e9 100644 > > --- a/examples/standalone/Makefile > > +++ b/examples/standalone/Makefile > > @@ -39,6 +39,7 @@ ELF-ppc += sched > > ELF-oxc += eepro100_eeprom > > > > ELF := $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU)) > > +ELF := hello_world > > [sp] This will break the earlier definition for ELF. > I am submitting the right fix in few mins.. >
Yes, I know. This was not meant to be applied. It was just to provide an observation. Not having any u-boot code expertise, I had no idea where to look. Thanks for finding a fix. I'm glad to know I wasn't the only one affected. - Anand _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
