Move pinctrl registers definition in GRF header file, clean code with prefix like other Rockchip SoCs. Use Fixed regulator(gpio) for sdmmc-pwren instead of signal controled by mmc controller.
Kever Yang (6): rockchip: pinctrl: move rk3328 grf reg definition in header file rockchip: pinctrl: rk3328: do not set io routing rockchip: evb-rk3328: set uart2 and sdmmc io routing rockchip: pinctrl: rk3328: use gpio instead of sdmmc-pwren rockchip: evb-rk3328: enable boot on regulator rockchip: dts: rk3328-evb: add sdmmc-pwren regulator arch/arm/dts/rk3328-evb.dts | 8 + arch/arm/include/asm/arch-rockchip/grf_rk3328.h | 114 ++++++++++++ board/rockchip/evb_rk3328/evb-rk3328.c | 20 ++- drivers/pinctrl/rockchip/pinctrl_rk3328.c | 226 +++++++----------------- 4 files changed, 205 insertions(+), 163 deletions(-) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
