On 05/08/2017 11:32 PM, Zhao Qiang wrote: > modify u_qe_init to upload QE firmware from SD card when it is SD > boot > > Signed-off-by: Zhao Qiang <qiang.z...@nxp.com> > --- > Changes for v2: > - fix issue of memory leak > Changes for v3: > - add CONFIG_SYS_QE_FMAN_FW_IN_NOR to ls1021a
<snip> > /* > diff --git a/include/configs/ls1043a_common.h > b/include/configs/ls1043a_common.h > index e269248..80c508e 100644 > --- a/include/configs/ls1043a_common.h > +++ b/include/configs/ls1043a_common.h > @@ -219,6 +219,7 @@ > */ > #define CONFIG_SYS_QE_FMAN_FW_IN_MMC > #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) > +#define CONFIG_SYS_QE_FW_ADDR (512 * 0x4a08) > #elif defined(CONFIG_QSPI_BOOT) > #define CONFIG_SYS_QE_FW_IN_SPIFLASH > #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 > @@ -230,6 +231,7 @@ > #define CONFIG_SYS_QE_FMAN_FW_IN_NOR > /* FMan fireware Pre-load address */ > #define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 > +#define CONFIG_SYS_QE_FW_ADDR 0x60600000 Qiang, Your patch and Alison's patch (http://patchwork.ozlabs.org/patch/755865/) both modify the mapping. Please confirm the addresses are still OK with both patches. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
