This option is only used in one driver and two boards. It does not seem
worth having the ability to remove this part of the support.
Drop the option.
Signed-off-by: Simon Glass <s...@chromium.org>
---
README | 1 -
drivers/misc/ds4510.c | 8 --------
include/configs/xpedite517x.h | 1 -
include/configs/xpedite537x.h | 1 -
scripts/config_whitelist.txt | 1 -
5 files changed, 12 deletions(-)
diff --git a/README b/README
index 2ca0102b57..3c4f0165b1 100644
--- a/README
+++ b/README
@@ -831,7 +831,6 @@ The following options need to be configured:
CONFIG_CMD_DHCP * DHCP support
CONFIG_CMD_DIAG * Diagnostics
CONFIG_CMD_DS4510 * ds4510 I2C gpio commands
- CONFIG_CMD_DS4510_INFO * ds4510 I2C info command
CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd
CONFIG_CMD_DS4510_RST * ds4510 I2C rst command
CONFIG_CMD_DTT * Digital Therm and Thermostat
diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c
index d7c9bd73c8..940e2ce6a0 100644
--- a/drivers/misc/ds4510.c
+++ b/drivers/misc/ds4510.c
@@ -186,7 +186,6 @@ int ds4510_gpio_read_val(uint8_t chip)
}
#ifdef CONFIG_CMD_DS4510
-#ifdef CONFIG_CMD_DS4510_INFO
/*
* Display DS4510 information
*/
@@ -240,7 +239,6 @@ static int ds4510_info(uint8_t chip)
return 0;
}
-#endif /* CONFIG_CMD_DS4510_INFO */
cmd_tbl_t cmd_ds4510[] = {
U_BOOT_CMD_MKENT(device, 3, 0, (void *)DS4510_CMD_DEVICE, "", ""),
@@ -248,9 +246,7 @@ cmd_tbl_t cmd_ds4510[] = {
U_BOOT_CMD_MKENT(output, 4, 0, (void *)DS4510_CMD_OUTPUT, "", ""),
U_BOOT_CMD_MKENT(input, 3, 0, (void *)DS4510_CMD_INPUT, "", ""),
U_BOOT_CMD_MKENT(pullup, 4, 0, (void *)DS4510_CMD_PULLUP, "", ""),
-#ifdef CONFIG_CMD_DS4510_INFO
U_BOOT_CMD_MKENT(info, 2, 0, (void *)DS4510_CMD_INFO, "", ""),
-#endif
#ifdef CONFIG_CMD_DS4510_RST
U_BOOT_CMD_MKENT(rstdelay, 3, 0, (void *)DS4510_CMD_RSTDELAY, "", ""),
#endif
@@ -324,10 +320,8 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char *
const argv[])
else
tmp &= ~(1 << ul_arg2);
return ds4510_pullup_write(chip, tmp);
-#ifdef CONFIG_CMD_DS4510_INFO
case DS4510_CMD_INFO:
return ds4510_info(chip);
-#endif
#ifdef CONFIG_CMD_DS4510_RST
case DS4510_CMD_RSTDELAY:
return ds4510_rstdelay_write(chip, ul_arg2);
@@ -378,10 +372,8 @@ U_BOOT_CMD(
"ds4510 eeprom/seeprom/sram/gpio access",
"device [dev]\n"
" - show or set current device address\n"
-#ifdef CONFIG_CMD_DS4510_INFO
"ds4510 info\n"
" - display ds4510 info\n"
-#endif
"ds4510 output pin 0|1\n"
" - set pin low or high-Z\n"
"ds4510 input pin\n"
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 447fd9557a..dae61b11e4 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -503,7 +503,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* Command configuration.
*/
#define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_IRQ
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 48f07b08c0..ce1ff86135 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -355,7 +355,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
* Command configuration.
*/
#define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_JFFS2
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 7646bb6842..b4c3d6b311 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -385,7 +385,6 @@ CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
CONFIG_CMD_DS4510
-CONFIG_CMD_DS4510_INFO
CONFIG_CMD_DS4510_MEM
CONFIG_CMD_DS4510_RST
CONFIG_CMD_DTT
--
2.13.0.rc2.291.g57267f2277-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
