On 5 May 2017 at 13:48, Philipp Tomsich <philipp.toms...@theobroma-systems.com> wrote: > With HDMI output for the RK3399 working, this update the RK3399-Q7 > (Puma) defconfig for the new functionality: > 1. enables PMIC command (to check if the HDMI voltages are correct) > +CONFIG_CMD_PMIC=y > +CONFIG_CMD_REGULATOR=y > 2. enables video-output (via HDMI) > +CONFIG_DM_VIDEO=y > +CONFIG_DISPLAY=y > +CONFIG_VIDEO_ROCKCHIP=y > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y > 3. turns on the 'dcache'-command (for a dcache flush) for our QA to > fill the framebuffer using 'mw.l' > +CONFIG_CMD_CACHE=y > 4. turns on the 'bmp'-command > +CONFIG_CMD_BMP=y > > Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> > > --- > > Changes in v3: None > Changes in v2: > - enable CMD_BMP in the puma-rk3399_defconfig (following a rebase to > the upstream master after CMD_BMP was migrate to Kconfig) > > configs/puma-rk3399_defconfig | 8 ++++++++ > 1 file changed, 8 insertions(+)
Acked-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
