With HDMI output for the RK3399 working, this update the RK3399-Q7
(Puma) defconfig for the new functionality:
1. enables PMIC command (to check if the HDMI voltages are correct)
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
2. enables video-output (via HDMI)
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
3. turns on the 'dcache'-command (for a dcache flush) for our QA to
fill the framebuffer using 'mw.l'
+CONFIG_CMD_CACHE=y
4. turns on the 'bmp'-command
+CONFIG_CMD_BMP=y
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---
Changes in v3: None
Changes in v2:
- enable CMD_BMP in the puma-rk3399_defconfig (following a rebase to
the upstream master after CMD_BMP was migrate to Kconfig)
configs/puma-rk3399_defconfig | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 33faf1f..b3c30a3 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -27,7 +27,11 @@ CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
@@ -82,4 +86,8 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Theobroma Systems"
CONFIG_G_DNL_VENDOR_NUM=0x2294
CONFIG_G_DNL_PRODUCT_NUM=0x3399
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
CONFIG_ERRNO_STR=y
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
