On Thu, May 4, 2017 at 12:11 PM, Jagan Teki <ja...@openedev.com> wrote: > From: Jagan Teki <ja...@amarulasolutions.com> > > Add initial devicetree support for i.MX6 Quad Sabresd board. > > The configs item are copied from configs/mx6sabresd_spl_defconfig > and added > - CONFIG_OF_CONTROL=y > - CONFIG_DM_GPIO=y > - CONFIG_DM_MMC=y > - CONFIG_BLK is not set > - CONFIG_DM_MMC_OPS is not set > - CONFIG_PINCTRL=y > - CONFIG_PINCTRL_IMX6=y > > Cc: Stefano Babic <sba...@denx.de> > Cc: Fabio Estevam <fabio.este...@nxp.com> > Cc: Michael Trimarchi <mich...@amarulasolutions.com> > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > --- > board/freescale/mx6sabresd/MAINTAINERS | 1 + > board/freescale/mx6sabresd/mx6sabresd.c | 132 > ++++++++++++++++++++++---------- > configs/imx6qdl_sabresd_spl_defconfig | 62 +++++++++++++++ > include/configs/mx6sabresd.h | 4 + > 4 files changed, 159 insertions(+), 40 deletions(-) > create mode 100644 configs/imx6qdl_sabresd_spl_defconfig > > diff --git a/board/freescale/mx6sabresd/MAINTAINERS > b/board/freescale/mx6sabresd/MAINTAINERS > index add2314..ccb939d 100644 > --- a/board/freescale/mx6sabresd/MAINTAINERS > +++ b/board/freescale/mx6sabresd/MAINTAINERS > @@ -6,3 +6,4 @@ F: include/configs/mx6sabresd.h > F: configs/mx6dlsabresd_defconfig > F: configs/mx6qsabresd_defconfig > F: configs/mx6sabresd_spl_defconfig > +F: configs/imx6qdl_sabresd_spl_defconfig
mx6qdl_sabresd_spl_defconfig is not a good name: - We do not support mx6dl currently - We support mx6qp Just use the existing mx6sabresd_spl_defconfig. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
