Dear Hui Tang 2009/11/3 Hui Tang <zetal...@gmail.com>: > Dear Wolfgang, > > 2009/11/1 Wolfgang Denk <w...@denx.de>: >> Dear "Hui.Tang", >> >> In message >> <6c7a9a5dcafb1f535ed33cb29d579db993846325.1256898456.git.zetal...@gmail.com> >> you wrote: >>> Add gec2410_config option for GEC2410 >>> >>> Signed-off-by: Hui.Tang <zetal...@gmail.com> >>> --- >>> Makefile | 7 +++++++ >>> 1 files changed, 7 insertions(+), 0 deletions(-) >> >> This belongs all in one commit. >> >>> index bcb3fe9..2de0b1d 100644 >>> --- a/Makefile >>> +++ b/Makefile >>> @@ -2951,6 +2951,13 @@ davinci_dm365evm_config : unconfig >>> davinci_dm6467evm_config : unconfig >>> @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci >>> >>> +gec2410_config : unconfig >>> + @mkdir -p $(obj)include $(obj)board/gec/gec2410 >>> + @mkdir -p $(obj)nand_spl/board/gec/gec2410 >>> + @echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp >>> + @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0 >>> + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk >>> + >>> imx27lite_config: unconfig >>> @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 >> >> An ARM920 board does not belong into the arm926ejs block. >> > > I have put the board config in the part of > > ######################################################################## > ## ARM Integrator boards - see doc/README-integrator for more info. > > as the sbc2410x_config does, > > Would you please give me some advice where should I put the gec2410 > board config?
I think, It is better to put bottom of s3c24x0 board series. (next to VCMA9) > > Thanks. > > BR. > Hui. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > Thanks Minkyu Kang -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
