Dear Wolfgang, 2009/11/1 Wolfgang Denk <w...@denx.de>: > Dear "Hui.Tang", > > In message > <6c7a9a5dcafb1f535ed33cb29d579db993846325.1256898456.git.zetal...@gmail.com> > you wrote: >> Add gec2410_config option for GEC2410 >> >> Signed-off-by: Hui.Tang <zetal...@gmail.com> >> --- >> Makefile | 7 +++++++ >> 1 files changed, 7 insertions(+), 0 deletions(-) > > This belongs all in one commit. > >> index bcb3fe9..2de0b1d 100644 >> --- a/Makefile >> +++ b/Makefile >> @@ -2951,6 +2951,13 @@ davinci_dm365evm_config : unconfig >> davinci_dm6467evm_config : unconfig >> @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci >> >> +gec2410_config : unconfig >> + @mkdir -p $(obj)include $(obj)board/gec/gec2410 >> + @mkdir -p $(obj)nand_spl/board/gec/gec2410 >> + @echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp >> + @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0 >> + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk >> + >> imx27lite_config: unconfig >> @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 > > An ARM920 board does not belong into the arm926ejs block. >
I have put the board config in the part of ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. as the sbc2410x_config does, Would you please give me some advice where should I put the gec2410 board config? Thanks. BR. Hui. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
