This patch is to adjust the memory mapping for FLash/SD card on LS1021AQDS and LS1021ATWR, such as U-Boot start address on serial Flash, QE firmware load address and environment address.
Signed-off-by: Alison Wang <alison.w...@nxp.com> --- include/configs/ls1021aqds.h | 10 +++++----- include/configs/ls1021atwr.h | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index c3224c8..97f6c43 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #endif #ifdef CONFIG_NAND_BOOT @@ -499,7 +499,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_DEVICE_DISABLE -#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -550,14 +550,14 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #elif defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND @@ -565,7 +565,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 1d0b469..aecbee0 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -133,7 +133,7 @@ #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -410,7 +410,7 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif -#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 /* * Environment @@ -418,18 +418,18 @@ #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x20000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif -- 2.1.0.27.g96db324 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
