Hugo Vincent wrote: > Hi everyone, > > This patch improves I2C support on OMAP3 platforms, including > supporting the second and third I2C controllers (mainline only > supports the first controller), and supporting writes where alen=0 > (i.e. no register address - this was needed for some I2C devices I > needed to drive from u-boot). > > Tested on Gumstix Overo with several I2C devices, on I2C1 and 3. > > The multi-bus support is mostly from this patch: > http://www.beagleboard.org/gitweb/?p=u-boot-arm.git;a=commit;h=52eddcd07c2e7ad61d15bab2cf2d0d21466eaca2 > > Best regards, > Hugo Vincent > > Signed-off-by: Hugo Vincent <hugo.vinc...@gmail.com>
Does anybody have an up to date version of this patch? Seems we need it for Beagle Zippy, too. Thanks Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot