Hi Andreas, On 20 April 2017 at 18:47, Andreas Färber <afaer...@suse.de> wrote: > Am 21.04.2017 um 02:34 schrieb Andreas Färber: >> Hi Simon, >> >> Am 21.04.2017 um 01:44 schrieb Simon Glass: >>> On 20 April 2017 at 17:23, Andreas Färber <afaer...@suse.de> wrote: >>>> Using -rc2 with firefly-rk3288 defconfig I can only boot into SPL but >>>> not into full U-Boot. I am using the old documented way of dd'ing to >>>> sector 256 on SD (doc/README.rockchip). >>>> >>>> Looking at include/configs/rk3288_common.h I also tried putting >>>> u-boot.img on a FAT partition, to no effect. >>>> >>>> v2017.03 doesn't even show SPL working. >>>> v2017.01 worked okay. >>>> >>>> Build log for -rc2: >>>> https://build.opensuse.org/build/Base:System:Staging/openSUSE_Factory_ARM/armv7l/u-boot-firefly-rk3288/_log >>> >>> Can you try removing RETURN_TO_BROM (or imilsar) and adding >>> CONFIG_SPL_OF_PLATDATA? >> >> As an interim update I can share that latest master behaves slightly >> differently: >> >> U-Boot SPL 2017.05-rc2-00053-g3c476d8 (Apr 21 2017 - 02:29:48) >> Returning to boot ROM... >> >> compared to: >> >> U-Boot SPL 2017.05-rc2 (Apr 20 2017 - 14:33:20) > > Disabling the ROCKCHIP_SPL_BACK_TO_BROM option I get: > > U-Boot SPL 2017.05-rc2-00053-g3c476d8 (Apr 21 2017 - 02:38:52) > SPL: Unsupported Boot Device! > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > If I additionally enable SPL_OF_PLATDATA then I am back to the v2017.03 > state of no serial output.
I just tested mainline with those two changes and it works for me. I pushed my patch to u-boot-rockchip/firefly-working. Can you try again? Regards, Simon > > Regards, > Andreas > > -- > SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany > GF: Felix Imendörffer, Jane Smithard, Graham Norton > HRB 21284 (AG Nürnberg) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
