Am 21.04.2017 um 02:34 schrieb Andreas Färber: > Hi Simon, > > Am 21.04.2017 um 01:44 schrieb Simon Glass: >> On 20 April 2017 at 17:23, Andreas Färber <afaer...@suse.de> wrote: >>> Using -rc2 with firefly-rk3288 defconfig I can only boot into SPL but >>> not into full U-Boot. I am using the old documented way of dd'ing to >>> sector 256 on SD (doc/README.rockchip). >>> >>> Looking at include/configs/rk3288_common.h I also tried putting >>> u-boot.img on a FAT partition, to no effect. >>> >>> v2017.03 doesn't even show SPL working. >>> v2017.01 worked okay. >>> >>> Build log for -rc2: >>> https://build.opensuse.org/build/Base:System:Staging/openSUSE_Factory_ARM/armv7l/u-boot-firefly-rk3288/_log >> >> Can you try removing RETURN_TO_BROM (or imilsar) and adding >> CONFIG_SPL_OF_PLATDATA? > > As an interim update I can share that latest master behaves slightly > differently: > > U-Boot SPL 2017.05-rc2-00053-g3c476d8 (Apr 21 2017 - 02:29:48) > Returning to boot ROM... > > compared to: > > U-Boot SPL 2017.05-rc2 (Apr 20 2017 - 14:33:20)
Disabling the ROCKCHIP_SPL_BACK_TO_BROM option I get: U-Boot SPL 2017.05-rc2-00053-g3c476d8 (Apr 21 2017 - 02:38:52) SPL: Unsupported Boot Device! SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### If I additionally enable SPL_OF_PLATDATA then I am back to the v2017.03 state of no serial output. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
