Hi Eddie, > all rk3288 based boards support rockusb, so enable it > > Signed-off-by: Eddie Cai <eddie.cai.li...@gmail.com> > --- > configs/evb-rk3288_defconfig | 2 ++ > configs/fennec-rk3288_defconfig | 1 + > configs/firefly-rk3288_defconfig | 1 + > configs/miqi-rk3288_defconfig | 1 + > configs/popmetal-rk3288_defconfig | 1 + > configs/rock2_defconfig | 2 ++ > configs/sandbox_defconfig | 1 + > configs/tinker-rk3288_defconfig | 1 + > 8 files changed, 10 insertions(+) > > diff --git a/configs/evb-rk3288_defconfig > b/configs/evb-rk3288_defconfig index aad2533..6be46fb 100644 > --- a/configs/evb-rk3288_defconfig > +++ b/configs/evb-rk3288_defconfig > @@ -17,6 +17,8 @@ CONFIG_CMD_MMC=y > CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > CONFIG_CMD_GPIO=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_CACHE=y > diff --git a/configs/fennec-rk3288_defconfig > b/configs/fennec-rk3288_defconfig index d1b0ffc..ba8a356 100644 > --- a/configs/fennec-rk3288_defconfig > +++ b/configs/fennec-rk3288_defconfig > @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > CONFIG_CMD_GPIO=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_CACHE=y > diff --git a/configs/firefly-rk3288_defconfig > b/configs/firefly-rk3288_defconfig index b0741d7..c860c06 100644 > --- a/configs/firefly-rk3288_defconfig > +++ b/configs/firefly-rk3288_defconfig > @@ -17,6 +17,7 @@ CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > CONFIG_CMD_GPIO=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_CACHE=y > diff --git a/configs/miqi-rk3288_defconfig > b/configs/miqi-rk3288_defconfig index 203824b..3c42d99 100644 > --- a/configs/miqi-rk3288_defconfig > +++ b/configs/miqi-rk3288_defconfig > @@ -17,6 +17,7 @@ CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > CONFIG_CMD_GPIO=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_CACHE=y > diff --git a/configs/popmetal-rk3288_defconfig > b/configs/popmetal-rk3288_defconfig index dfc84b9..ddf6062 100644 > --- a/configs/popmetal-rk3288_defconfig > +++ b/configs/popmetal-rk3288_defconfig > @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > CONFIG_CMD_GPIO=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_CACHE=y > diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig > index e9a32a9..365bc90 100644 > --- a/configs/rock2_defconfig > +++ b/configs/rock2_defconfig > @@ -16,6 +16,8 @@ CONFIG_CMD_MMC=y > CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > CONFIG_CMD_GPIO=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_CACHE=y > diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig > index 7f3f5ac..9350d51 100644 > --- a/configs/sandbox_defconfig > +++ b/configs/sandbox_defconfig > @@ -33,6 +33,7 @@ CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > CONFIG_CMD_REMOTEPROC=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_TFTPPUT=y > diff --git a/configs/tinker-rk3288_defconfig > b/configs/tinker-rk3288_defconfig index cec3938..d96d7d3 100644 > --- a/configs/tinker-rk3288_defconfig > +++ b/configs/tinker-rk3288_defconfig > @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > CONFIG_CMD_I2C=y > CONFIG_CMD_USB=y > +CONFIG_CMD_ROCKUSB=y > CONFIG_CMD_GPIO=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_CACHE=y
This patch would need to be adjusted if mentioned earlier changes are applied. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
