On 13 April 2017 at 19:11, Wenyou Yang <wenyou.y...@atmel.com> wrote: > The device tree source files of at91sam9rlek boards are copied from > the Linux v4.10, do the changes as below. > - Add the reg property for the pinctrl node. > - Move the gpio (pioA, pioB, pioC, pioD) nodes as the pinctrl's > slibling nodes, instead of the child nodes. > - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used > in board_init_f stage. > - Fix the compilation warnings. > > Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> > --- > > Changes in v2: None > > arch/arm/dts/Makefile | 2 + > arch/arm/dts/at91sam9rl.dtsi | 1139 > +++++++++++++++++++++++++++++++++++++++++ > arch/arm/dts/at91sam9rlek.dts | 239 +++++++++ > 3 files changed, 1380 insertions(+) > create mode 100644 arch/arm/dts/at91sam9rl.dtsi > create mode 100644 arch/arm/dts/at91sam9rlek.dts
Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot