The purpose of the patch set is to convert the board to support the
driver model and device tree.
It is based on the patch set:
1./ PATCH v2 0/6] ARM: dts: at91: Add dts files for AT91 SoCs' boards
https://lists.denx.de/pipermail/u-boot/2017-April/287222.html
2./ [PATCH v6] mmc: gen_atmel_mci: add driver model support for mci
https://lists.denx.de/pipermail/u-boot/2017-April/287071.html
Changes in v4:
- Rebase on the master branch (22e10be45) of u-boot-dm git tree.
- Update the cover-letter.
Changes in v3:
- Convert Atmel mci driver to support the driver model.
- Remain the SPI_SPEED macro.
- Add the support of Atmel uart device be used in the
board_init_f stage.
- Disable the SPL for nand config.
- Improve the commit log.
- Remove Atmel mci related code.
- Use CONFIG_DEBUG_UART_CLOCK as the input clock for the early
debug UART.
- Drop [PATCH 4/5] configs: at91sam9x5ek: move SYS_NO_FLASH to defconfig.
Changes in v2:
- Rebase on the patch set:
[RESEND PATCH v2] ARM: at91: add default config file for sama5d36ek CMP
board
http://lists.denx.de/pipermail/u-boot/2017-February/280525.html
Wenyou Yang (3):
configs: at91sam9x5ek: Update to support DM/DT
board: at91sam9x5ek: Clean up code
board: at91sam9x5ek: Enable early debug UART
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 82 ++++----------------------------
configs/at91sam9x5ek_dataflash_defconfig | 29 ++++++++++-
configs/at91sam9x5ek_mmc_defconfig | 29 ++++++++++-
configs/at91sam9x5ek_nandflash_defconfig | 35 +++++++++++---
configs/at91sam9x5ek_spiflash_defconfig | 36 ++++++++++----
include/configs/at91sam9x5ek.h | 25 +---------
6 files changed, 123 insertions(+), 113 deletions(-)
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
