The purpose of the patch set is to convert the board to support
the driver model and the device tree.

It is based on the patch set:
        [PATCH v8 0/2] pinctrl: at91: Add pinctrl driver
        https://lists.denx.de/pipermail/u-boot/2017-March/284577.html

Changes in v2:
 - Remain the SPI speed macros.
 - Disable the SPL option for the nand config.
 - Add support of Atmel uart be used in the board_init_f stage.
 - Improve the commit log.
 - Use CONFIG_DEBUG_UART_CLOCK as the input clock for the early
   debug UART.
 - Move out [PATCH 1/4] ARM: dts: at91: add dts files for at91sam9n12ek.

Wenyou Yang (3):
  configs: at91sam9n12ek: Update for DT and DM support
  board: at91sam9n12ek: Clean up code
  board: at91sam9n12ek: Enable early debug UART

 board/atmel/at91sam9n12ek/at91sam9n12ek.c | 64 +++++++------------------------
 configs/at91sam9n12ek_mmc_defconfig       | 25 +++++++++++-
 configs/at91sam9n12ek_nandflash_defconfig | 31 +++++++++++----
 configs/at91sam9n12ek_spiflash_defconfig  | 32 ++++++++++++----
 include/configs/at91sam9n12ek.h           | 19 +--------
 5 files changed, 86 insertions(+), 85 deletions(-)

-- 
2.11.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to