Also created alias for gpios for stm32f7 discovery board. Based on these
aliases, it would be possible to get gpio devices by sequence.
Signed-off-by: Vikas Manocha <vikas.mano...@st.com>
cc: Christophe KERELLO <christophe.kere...@st.com>
---
Changed in v2: None
arch/arm/dts/stm32f746-disco.dts | 12 +++++
arch/arm/dts/stm32f746.dtsi | 111 +++++++++++++++++++++++++++++++++++++++
2 files changed, 123 insertions(+)
diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index f098d2e..f830aa9 100644
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -65,6 +65,18 @@
aliases {
serial0 = &usart1;
spi0 = &qspi;
+ /* Aliases for gpios so as to use sequence */
+ gpio0 = &gpioa;
+ gpio1 = &gpiob;
+ gpio2 = &gpioc;
+ gpio3 = &gpiod;
+ gpio4 = &gpioe;
+ gpio5 = &gpiof;
+ gpio6 = &gpiog;
+ gpio7 = &gpioh;
+ gpio8 = &gpioi;
+ gpio9 = &gpioj;
+ gpio10 = &gpiok;
};
};
diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index e9fd6f4..865d5cf 100644
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -114,6 +114,117 @@
u-boot,dm-pre-reloc;
pins-are-numbered;
+ gpioa: gpio@40020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x0 0x400>;
+ clocks = <&rcc 0 0>;
+ st,bank-name = "GPIOA";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x400 0x400>;
+ clocks = <&rcc 0 1>;
+ st,bank-name = "GPIOB";
+ u-boot,dm-pre-reloc;
+ };
+
+
+ gpioc: gpio@40020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x800 0x400>;
+ clocks = <&rcc 0 2>;
+ st,bank-name = "GPIOC";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0xc00 0x400>;
+ clocks = <&rcc 0 3>;
+ st,bank-name = "GPIOD";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x1000 0x400>;
+ clocks = <&rcc 0 4>;
+ st,bank-name = "GPIOE";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x1400 0x400>;
+ clocks = <&rcc 0 5>;
+ st,bank-name = "GPIOF";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x1800 0x400>;
+ clocks = <&rcc 0 6>;
+ st,bank-name = "GPIOG";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc 0 7>;
+ st,bank-name = "GPIOH";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x2000 0x400>;
+ clocks = <&rcc 0 8>;
+ st,bank-name = "GPIOI";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x2400 0x400>;
+ clocks = <&rcc 0 9>;
+ st,bank-name = "GPIOJ";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x2800 0x400>;
+ clocks = <&rcc 0 10>;
+ st,bank-name = "GPIOK";
+ u-boot,dm-pre-reloc;
+ };
+
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
