Remove the board_i2c_init() function. i2c should be initialized with device-tree file.
Signed-off-by: Jaehoon Chung <[email protected]> --- board/samsung/trats2/trats2.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index 150503e..2920619 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -100,32 +100,6 @@ static void board_external_gpio_init(void) gpio_set_pull(EXYNOS4X12_GPIO_X37, S5P_GPIO_PULL_NONE); /* HDMI_HPD */ } -#ifdef CONFIG_SYS_I2C_INIT_BOARD -static void board_init_i2c(void) -{ - int err; - - /* I2C_7 */ - err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE); - if (err) { - debug("I2C%d not configured\n", (I2C_7)); - return; - } - - /* I2C_8 */ - gpio_request(EXYNOS4X12_GPIO_F14, "i2c8_clk"); - gpio_request(EXYNOS4X12_GPIO_F15, "i2c8_data"); - gpio_direction_output(EXYNOS4X12_GPIO_F14, 1); - gpio_direction_output(EXYNOS4X12_GPIO_F15, 1); - - /* I2C_9 */ - gpio_request(EXYNOS4X12_GPIO_M21, "i2c9_clk"); - gpio_request(EXYNOS4X12_GPIO_M20, "i2c9_data"); - gpio_direction_output(EXYNOS4X12_GPIO_M21, 1); - gpio_direction_output(EXYNOS4X12_GPIO_M20, 1); -} -#endif - #ifdef CONFIG_SYS_I2C_SOFT int get_soft_i2c_scl_pin(void) { @@ -179,9 +153,6 @@ int exynos_power_init(void) struct power_battery *pb; struct pmic *p_chrg, *p_muic, *p_fg, *p_bat; -#ifdef CONFIG_SYS_I2C_INIT_BOARD - board_init_i2c(); -#endif pmic_init(I2C_7); /* I2C adapter 7 - bus name s3c24x0_7 */ pmic_init_max77686(); pmic_init_max77693(I2C_10); /* I2C adapter 10 - bus name soft1 */ -- 2.10.2 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
