On Fri, 2017-03-31 at 22:22 -0600, Simon Glass wrote: > Hi Marcel, > > On 24 March 2017 at 18:18, Marcel Ziswiler <mar...@ziswiler.com> > wrote: > > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > > This patch adds board support for the Toradex Apalis TK1 a computer > > on > > module which can be used on different carrier boards. > > > > The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of > > DDR3L > > RAM, a bunch of level shifters, an eMMC, a TMP451 temperature > > sensor > > chip, an I210 gigabit Ethernet controller and a SGTL5000 audio > > codec. > > Furthermore, there is a Kinetis MK20DN512 companion micro > > controller for > > analogue, CAN and resistive touch functionality. > > > > For the sake of ease of use we do not distinguish between different > > carrier boards for now as the base module features are deemed > > sufficient enough for regular booting. > > > > The following functionality is working so far: > > - eMMC boot, environment storage and Toradex factory config block > > - Gigabit Ethernet > > - MMC/SD cards (both MMC1 as well as SD1 slot) > > - USB client/host (dual role OTG port as client e.g. for DFU/UMS or > > host, > > other two ports as host) > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > Reviewed-by: Simon Glass <s...@chromium.org> > > > > Signed-off-by: Marcel Ziswiler <mar...@ziswiler.com> > > --- > > > > Changes in v5: > > - Re-enabled EFI loader support after discussion with Alexander. > > Well OK, either way is fine with me.
Thanks, Simon. Do you happen to know whether anybody will actually pick that series up and apply it any time soon? > Regards, > Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
